A novel biocomposite denoted Ns-AGS was synthesized from Alaeis guineensis Shells and nanosilica extracted from rice husk through a sol-gel method. The final product was applied in the adsorption of an azo dye namely Azocarmin G in synthetic aqueous solution. The characterization of the biocomposite by X-ray diffraction (XRD), Scanning Electron Microscopy, Fourier transform infrared spectroscopy (FTIR) and FTIR/TGA Analysis revealed an amorphous and porous microstructure with a random distribution of nanosilica particles in the lignocellulosic matrix evidencing several functional groups. The influence of contact time (0-120min), adsorbent dose (0.1-0.3g), initial dye concentration (25-100mg/L) and initial pH (3.5-6.5) were investigated at different temperatures (298°K, 316°K and 327°K). This study showed that adsorption of Azocarmin G onto Ns-AGS is favored by acidic pH values leading to more than 90% removal under optimal conditions of pH = 3.5; 60 min; 327°K for an adsorbent dose of 0.3g/25mL. The experimental kinetics data preferentially fitted the Hô model with a correlation coefficient R2 = 0.9992, indicating that adsorption is the determining step of the process illustrating adsorbate-adsorbent affinity. The equilibrium models demonstrated competitiveness, which may be related to the complex nature of the biocomposite. However, the Redlich-Paterson model, which combines Langmuir and Freundlich models, was more suitable at 327°K. The thermodynamic parameters demonstrated the spontaneity of the adsorption process (ΔG < 0) and the endothermic nature of the reaction (ΔH > 0). The low activation energy value (2.92 kJ/mol < 20 kJ/mol) calculated using the Arrhenius equation reflects a physical adsorption that would involve weak Van der Waals and hydrogen bond interactions which combined to Hô model evolved competitivity between chemical and physical processes.
Response Surface Methodology was used to evaluate the main and interactions effects of contact time (20–60 min), temperature (60–90°C) and adsorbent dosage (1–2%) of the palm oil free fatty acids (FFAs) adsorption onto a silica/smectite composite. The regression model was found to be able to predict more than 99% of the targeted response variation in the studied range (R2 = 99.31%). An ANOVA was used to evaluate the accuracy of the regression model and it was found to predict more than 99% of the response variation. The Pareto Charts of Standardized Effects showed that almost all the explanatory factors were influential. The factorial plots evidenced that time/temperature interaction was most effective and the corresponding contour and surface plots were drawn. The second-order kinetic model was better followed with the highest value of the determination coefficient (R2 = 0.996) and the lowest value of Root Mean Square Deviation of 0.555. Response Optimizer Function showed an optimum for FFAs removal of more than 90% (27.18 mg of KOH/g) at the adsorbent dosage of 2%, contact time of 60 min, and temperature of 90°C. Moreover, a good correlation between the predicted and experimental values was observed within reasonable limits.