Ángel Raúl Cruz Serrato

Dr. Ángel Raúl Cruz Serrato

Ingeniería sustentable, Centro de Investigación en Materiales Avanzados, S. C. Subsede Durango, Durango, Mexico
orcid

Research Focus & Metrics

Representative Publications

View All Publications
27 October 2026 in Microplastics
Verified
Journal Article
Open access
PDF file
Ángel Raúl Cruz SerratoÁngel Raúl Cruz Serrato
Ángel Raúl Cruz Serrato
LRLILIANA REYNOSO-CUEVAS
LILIANA REYNOSO-CUEVAS
VMVictor Jesús Martínez-Gómez
Victor Jesús Martínez-Gómez
CACorazón Giovanna Morales Amaya
Corazón Giovanna Morales Amaya
SLSamuel Alejando Lozano-Morales
Samuel Alejando Lozano-Morales
Microplastic (MP) contamination in wastewater is an emerging environmental concern. This study evaluated electrocoagulation (EC) using Al–Al electrodes to remove high-density polyethylene microplastics (HDPE-MP) from synthetic water and real municipal wastewater. A Box–Behnken design coupled with response surface methodology was used to assess the effects of initial pH, current density (J), initial HDPE-MP concentration, and NaCl concentration. In real municipal wastewater, the highest average HDPE-MP removal (88.5%) was achieved at pH 7, together with COD and turbidity reductions of 58.9% and 72.3%, respectively. NaCl concentration had a limited direct effect on HDPE-MP removal. Increasing the nominal current-density level did not proportionally improve removal efficiency, while average energy consumption increased from 9.11 kWh/m3 at the nominal level of 5 mA/cm2 to 33.06 kWh/m3 at the nominal level of 20 mA/cm2. XRD analysis of the recovered sludge showed poor crystalline Al-based phases and diffraction features consistent with semicrystalline HDPE. Overall, Al–Al electrocoagulation showed promising performance for HDPE-MP removal from complex wastewater matrices, although operating conditions should be optimized to balance removal efficiency and energy consumption.