Based on the Mohr–Coulomb yield criterion, an analytical method is presented to determine the plastic zone in an infinite plate weakened by a circular hole and subjected to non-hydrostatic stresses at infinity. It is worth noting that this paper considers the more complicated case that the plastic zone cannot completely surround the hole, namely the elastoplastic interface is non-enclosed. Initially, the non-circular elastic zone in the physical plane is mapped onto the outer region of a unit circle in the image plane by the conformal transformation in the complex variable method. Thereby, determining the elastoplastic interface is equivalent to solving the mapping function coefficients. The nonlinear equations for solving the coefficients are established by considering both the stress continuity conditions along the elastoplastic interface and the stress boundary conditions along the elastic part of the hole. Naturally, the problem can be further transformed into an optimization problem, which is ultimately achieved by the differential-evolution algorithm; what is more, an analytical solution with high accuracy is obtained. Based on the programmed computing, the influences of various parameters on the shape and size of the plastic zone are given.
26 February 2026 in International Journal of Rock Mechanics and Mining Sciences
Based on the Tresca yield criterion, an analytical method is proposed to determine the elastoplastic interface around a circular hole in an infinite plate subjected to biaxial tension-compression loads at infinity. Comparing with the plastic region formed under the action of biaxial tension-tension or biaxial compression- compression loads, the characteristic of the plastic regions is that they cannot completely surround the hole and there may be two or four nonintersecting plastic regions around the hole. In both cases, the conformal mapping is employed to map the elastic region in the physical plane onto the outer region of a unit circle in the image plane, which transforms this kind of plane elastoplastic problem into a problem of mapping. According to the stress continuity conditions on the elastoplastic interface and the stress boundary conditions on the elastic part of the circular hole, a set of nonlinear equations containing the mapping function coefficients is established. The problem can be further transformed into an optimization problem determined by the differential-evolution algorithm. The correctness of the presented method is verified by numerical method. The influence of loads and material constant on the size and shape of the plastic regions is discussed in detail.
21 June 2025 in Journal of Rock Mechanics and Geotechnical Engineering