Heavy metals content in tires affects the safety of soil and agricultural products. The digestion method is a pretreatment for determining heavy metals in tire samples, and will affect the efficiency and accuracy of the heavy metal determination. The microwave digestion process and reagents for tire samples are not currently standardized. Therefore, this study attempts to provide an appropriate method of resolution for scholars. All digestion processes were performed in Mars One. We tested 15 different acid mixtures to determine the best reagent type and dose and then investigated the effect of maximum temperature, holding time, and sample grams on the degree of digestion. In summary, the best condition to digest the tire sample was a mixture of 3 ml HNO3 and 7 ml H2SO4, taking 0.1 (± 0.0005) g tire sample, at the maximum digestion temperature of 220 °C for 25 min. The experimental conclusion will provide a reliable experimental method for scientists using MARS One to study heavy metals in tires. At the same time, researchers using the MARS series can also find valuable references in this paper.
With the accelerated pace of road construction, road traffic sources are becoming one of the main sources of environmental heavy metals pollutants in addition to industrial pollution sources. Studies have shown that the heavy metals pollutants generated during transportation mainly include lead (Pb) and other elements. Most studies have focused on the characteristics and distribution patterns and qualitative source analysis of heavy metals pollution in roadside soils. However, systematic quantitative analysis of heavy metals in roadside soils and the atmosphere has not yet been achieved, which makes it difficult to effectively support the prevention and management of heavy metals pollution in roadside soils. Therefore, in this study, to clarify the sources of Pb in the roadside atmosphere and soils and their relative contributions, roadside atmospheric dustfall, sediment and soil samples were collected in industrial and nonindustrial areas, and the Pb isotopic values of the samples were determined via inductively coupled plasma–mass spectrometry (ICP‒MS). The sources of Pb in the roadside atmosphere and soil samples were quantified by isotope tracing. The results showed that vehicle emissions contributed the most to Pb in the roadside atmosphere, followed by road sediment and natural atmospheric dustfall, with contributions of 43%-49%, 35%-40% and 15%-17%, respectively. Roadside atmospheric dustfall contributed the most to Pb in roadside soil, followed by road sediment, with contributions of 68%-69% and 31%-32%, respectively, in nonindustrial areas and 61%-62% and 38%-39%, respectively, in industrial areas. The study results provide a basis for the prevention and control of Pb pollution in roadside soils.