Ricardo Lopez

Ricardo Lopez

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 December 2014 in Materials
Verified
Journal Article
Open access
PDF file
EGElizabeth Rojas Garcia
Elizabeth Rojas Garcia
RLRicardo Lopez
Ricardo Lopez
MLMarcos May Lozano
Marcos May Lozano
IPIsaías Hernández Pérez
Isaías Hernández Pérez
MVMaría José Valero
María José Valero
AMAna Marisela Maubert
Ana Marisela Maubert
A Metal-Organic Framework (MOF), iron-benzenetricarboxylate (Fe(BTC)), has been studied for the adsorptive removal of azo-dye Orange II from aqueous solutions, where the effect of various parameters was tested and isotherm and kinetic models were suggested. The adsorption capacities of Fe(BTC) were much higher than those of an activated carbon. The experimental data can be best described by the Langmuir isotherm model (R2 > 0.997) and revealed the ability of Fe(BTC) to adsorb 435 mg of Orange II per gram of adsorbent at the optimal conditions. The kinetics of Orange II adsorption followed a pseudo-second-order kinetic model, indicating the coexistence of physisorption and chemisorption, with intra-particle diffusion being the rate controlling step. The thermodynamic study revealed that the adsorption of Orange II was feasible, spontaneous and exothermic process (−25.53 kJ·mol−1). The high recovery of the dye showed that Fe(BTC) can be employed as an effective and reusable adsorbent for the removal of Orange II from aqueous solutions and showed the economic interest of this adsorbent material for environmental purposes.

30 December 2018 in Catalysts
Verified
Journal Article
Open access
PDF file
JMJeremías Martínez
Jeremías Martínez
EHEdgar Hernández
Edgar Hernández
SASalvador Alfaro
Salvador Alfaro
RLRicardo Lopez
Ricardo Lopez
GAGuadalupe Valverde Aguilar
Guadalupe Valverde Aguilar
MVMiguel Valenzuela
Miguel Valenzuela
In this work, we present an investigation concerning the evaluation of the catalytic properties of Ni nanoparticles supported on ZrO2, SiO2, and MgAl2O4 for CO2 hydrogenation to methane. The supports were prepared by coprecipitation and sol-gel, while Ni was incorporated by impregnation (10–20 wt %). X-ray diffraction, nitrogen physisorption, temperature-programmed reduction, H2 pulse chemisorption, Raman spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy were the main characterization techniques employed. A laboratory fixed-bed reactor operated at atmospheric pressure, a temperature range of 350–500 °C, and a stoichiometric H2/CO2 molar ratio was used for catalyst evaluation. The most outstanding results were obtained with nickel catalysts supported on ZrO2 with CO2 conversions of close to 60%, and selectivity to methane formation was 100% on a dry basis, with high stability after 250 h of reaction time. The majority presence of tetragonal zirconia, as well as the strong Ni–ZrO2 interaction, were responsible for the high catalytic performance of the Ni/ZrO2 catalysts.

11 November 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
GPGerardo Pérez-Bravo
Gerardo Pérez-Bravo
JLJOSE LUIS CONTRERAS LARIOS
JOSE LUIS CONTRERAS LARIOS
JRJorge Francisco Rodríguez
Jorge Francisco Rodríguez
BZBeatriz Zeifert-Soares
Beatriz Zeifert-Soares
DÁDeyanira Ángeles-Beltrán
Deyanira Ángeles-Beltrán
JSJosé Salmones-Blasquez
José Salmones-Blasquez
Thermal and catalytic pyrolysis of waste expanded polystyrene (WEPS) was studied to obtain mainly styrene monomer, which can be recycled in the polystyrene industry. Initially, preliminary experiments were carried out in a static semi-batch glass reactor with basic catalysts and without catalysts, using toluene as solvent at 250 °C, determining their styrene yields to select the best catalyst. MgO turned out to be the best catalyst due to its stability and cost. This catalyst was characterized by XRD, BET area, SEM-EDS, Raman spectroscopy, UV–VIS, and TGA. The kinetic equation for WEPS pyrolysis in the glass reactor was determined as a first-order reaction. The heat of reaction, the Gibbs free energy change, and the entropy change were calculated. Finally, WEPS pyrolysis experiments were carried out using a rotating semi-batch steel reactor, at higher temperatures and without using solvents, evaluating the styrene yield and its performance for its possible industrial application. In this reaction, the activity remained almost constant after four catalyst regenerations. The best styrene yield was 94 wt%, which could be one of the highest reported in the literature. This result may be associated with the back-mixing obtained in the rotary reactor, in contrast to the performance observed in the static glass reactor.

23 December 2025 in Catalysts
Verified
Journal Article
Open access
PDF file
NGNaomi Nallely González
Naomi Nallely González
JLJOSE LUIS CONTRERAS LARIOS
JOSE LUIS CONTRERAS LARIOS
BSBeatriz Zeifert Soares
Beatriz Zeifert Soares
GFGustavo Fuentes
Gustavo Fuentes
MTMaría Eugenia Hernández Terán
María Eugenia Hernández Terán
Israel Pala-RosasIsrael Pala-Rosas
Israel Pala-Rosas
Selective catalytic reduction (SCR) of NO using various reducing agents is a critical area of research for mitigating environmental pollution. In this study, the influence of active phase loading was investigated in four bimetallic Pt-Ag/Al2O3-WOx catalysts, one monometallic Ag/Al2O3-WOx catalyst, and one Pt-Ag/Al2O3-WOx catalyst subjected to high-severity air-SO2 pretreatment. All catalysts were supported on cordierite monoliths, and their performance in NO SCR was evaluated using H2, C3H8, and CO as reducing agents. An increase in the active phase loading (Pt-Ag/Al2O3) from 10.7 wt% to 17.4 wt% resulted in higher conversions of NO, C3H8, and H2, as well as improved N2 selectivity. However, CO conversion decreased as the active phase loading increased, which was attributed to competitive reduction by H2, since both reactions occur within the same temperature range (100–200 °C). The presence of N2O below 6 ppm was observed in some catalysts. Furthermore, higher active phase loadings led to increased carbon deposition; the Ag/Al2O3-WOx catalyst exhibited the highest carbon content (5 wt%). The deposited carbon was identified as ordered graphitic carbon. In the Pt-Ag catalysts, the presence of Ag+ and Agⁿδ+ species, as well as the Ag° plasmon, was identified by UV-Vis spectroscopy. STEM analysis showed Ag-Pt crystallites with an average size of 24 nm, which may have contributed to the higher NO conversion observed at 350 °C and the improved N2 selectivity at 100 °C in the Pt-Ag bimetal catalysts, compared to the activity of the Ag/Al2O3-WOx catalyst.

24 October 2024 in Tendencias en energías renovables y sustentabilidad
Verified
Journal Article
Open access
DADeyanira Angeles-Beltrán
Deyanira Angeles-Beltrán
RLRicardo Lopez
Ricardo Lopez
Una de las grandes preocupaciones de la humanidad en la actualidad es el deterioro del planeta y el cada vez más preocupante calentamiento global. Dentro de los principales causantes del cambio climático está el dióxido de carbono producido por el consumo de los combustibles fósiles, actividad que nos permite la movilidad y el transporte de insumos alimenticios, médicos, tecnológicos y de casi toda actividad de nuestra vida cotidiana. En este sentido y en la búsqueda de combustibles limpios que puedan sustituir en un futuro no muy lejano a los combustibles fósiles, se han encontrado materiales como óxidos mixtos de hierro llamados ferritas que han demostrado mediante experimentación sustentada, que son útiles para la obtención de hidrógeno como combustible limpio. En el presente trabajo se describen detalles de esta investigación y sus perspectivas actuales.

28 August 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
NGNaomi Nallely González
Naomi Nallely González
JLJOSE LUIS CONTRERAS LARIOS
JOSE LUIS CONTRERAS LARIOS
BSBeatriz Zeifert Soares
Beatriz Zeifert Soares
GFGustavo Fuentes
Gustavo Fuentes
MTMaria Eugenia Hernandez Terán
Maria Eugenia Hernandez Terán
Israel Pala-RosasIsrael Pala-Rosas
Israel Pala-Rosas
Ag and Pt-Ag catalysts supported on Al2O3-tungsten oxides (WOx) deposited on cordierite monoliths were prepared for the removal of nitrogen oxides (NOx) from diesel engine ex-haust emissions using C3H8 as well as H2 as reductants in the selective catalytic reduction. The catalysts were characterized by N2 physisorption, X-ray diffraction (XRD), tempera-ture programmed reduction (TPR), scanning electron microscopy (SEM/EDX), transmis-sion electron microscopy (STEM/HAADF), H2 chemisorption, and Raman and UV-vis spectroscopy of the evaluated catalysts. The conversion of NO, C3H8 and CO was studied as a function of three GHSVs 30,000, 70,000 and 100,000 h-1 as well as the reaction tem-perature. The combination of 0.1wt%Pt-2wt%Ag /Al₂O₃-WOx on cordierite monoliths was active in NO reduction and CO and C₃H8 combustion. By STEM, small Pt-Ag bimetallic particles (20 nm) presented a high Pt concentration (58.6 atom%). Separate Ag particles were also detected. The best preparation conditions of boehmite AlO(OH)/cordierite mon-olith were obtained by applying three or four boehmite AlO(OH) impregnations, drying, calcination in air flow, and H₂ reduction at 500 °C and exchange with H₂PtCl₃ and AgNO3. A one-dimensional model of NO conversion as a function of reactor length was proposed considering external mass transfer limitations as dominant.