Li He

Prof. Dr. Li He

Guizhou University

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 October 2021 in RSC Advances
Verified
Journal Article
Open access
PDF file
MLMing Li
Ming Li
SLShengnan Li
Shengnan Li
BLBujin Liu
Bujin Liu
TJTuanhui Jiang
Tuanhui Jiang
DZDi Zhang
Di Zhang
WGWei Gong
Wei Gong
The inherently linear poly (lactic acid) suffers unsatisfying foaming behavior due to its low melt strength and poor crystallization properties. To overcome this drawback, a random terpolymer of ethylene, acrylic ester and glycidyl methacrylate (EGMA) was employed to improve the rheological behavior, crystallization properties, and foaming performance of poly (lactic acid) (PLA) through a chain extension reaction. The branched/micro-crosslinked structure formed by the chain extension reaction between EGMA and PLA effectively improved the dynamic rheological properties of PLA. As the content of EGMA increased from 0 wt% to 20 wt%, the crystal nucleation and crystal growth rate of various PLA samples have been significantly accelerated, resulting in a larger number and smaller size of spherulites, and the crystallinity of various PLA samples increased from 7.9% to 38.54%. The cell size of various PLA foams decreased from 53.5 to 22.0 μm and the cell density increased from 3.5 × 106 cells per cm3 to 2.5 × 107 cells per cm3, meanwhile, the cellular morphology of PLA foam was obviously improved. Moreover, the actual weight loss of PLA foams reached 26.1%, which is higher than the theoretical weight loss.

2 March 2021 in Polymers for Advanced Technologies
Verified
Journal Article
Closed access
PDF file
BLBujin Liu
Bujin Liu
TJTuanhui Jiang
Tuanhui Jiang
XZXiangbu Zeng
Xiangbu Zeng
RDRong Deng
Rong Deng
JGJun Gu
Jun Gu
LHLi He
Li He

11 December 2018 in Polymers
Verified
Journal Article
Open access
PDF file
WGWei Gong
Wei Gong
HFHai Fu
Hai Fu
CZChun Zhang
Chun Zhang
DBDaming Ban
Daming Ban
XYXiaogang Yin
Xiaogang Yin
LHLi He
Li He
In the present work, foamed polypropylene (PP) composites were prepared by chemical foaming technology, and the foaming quality and impact property of the foamed PP composites were studied. The results showed that the foaming quality was significantly improved after the introduction of thermoplastic rubber (TPR) and polyolefin elastomer (POE). Meanwhile, it was found that the impact property depended on the intrinsic toughness and contribution of foams (cells) to the PP composites. Furthermore, the data regarding impact property in low temperature showed that when the temperature was between −80 and −20 °C, the impact properties of the foamed PP composites were higher than that of the unfoamed sample, which was due to the impact property being completely contributed by cells under this condition. Meanwhile, when the temperature ranged from −20 to 20 °C, the impact property of the unfoamed sample was higher, which was due to the PP matrix contributing more to the impact property under this temperature. This work significantly improved the foaming quality of foamed PP composites and provided reliable evidence for the improvement of impact property.

1 January 2022 in e-Polymers
Verified
Journal Article
Open access
PDF file
LCLushuai Cao
Lushuai Cao
TJTuanhui Jiang
Tuanhui Jiang
BLBujin Liu
Bujin Liu
MLMing Li
Ming Li
DZDi Zhang
Di Zhang
LHLi He
Li He
Polyamide 6 (PA6) was modified with ethylene maleic anhydride syndiotactic copolymer resin (ZeMac), and triglycidyl isocyanurate (TGIC) as modifiers to prepare a grafting structure and a long-chain branching structure, respectively. The effects of two modifiers on the rheological behavior, crystallization properties, foaming performance, and mechanical properties of PA6 were systematically studied by rotating rheometry, differential scanning calorimetry and scanning electron microscopy. The results showed that there were differences in crystallization properties between the two modification methods, but they significantly improved the rheological, foaming performance, and mechanical properties of PA6. In particular, PA6 with long-chain branching structure through TGIC modification showed better performance in various physicochemical characterizations. The introduction of ZeMac reduced the average diameter of bubbles in pure PA6 from 146.32 to 88.12 µm, and the density of bubbles increased from 1.69 × 10 5 to 5.35 × 10 5 cells·cm −3 . The introduction of TGIC reduced the average diameter of bubbles in pure PA6 from 146.32 to 64.36 µm, and the density of bubbles increased to 1.31 × 10 6 cells·cm −3 . Moreover, the mechanical properties of both nonfoamed and foamed samples were improved after modification.

28 August 2023 in Journal of Applied Polymer Science
Verified
Journal Article
Closed access
MLMei Luo
Mei Luo
BLBujin Liu
Bujin Liu
TLTingyu Li
Tingyu Li
JXJiangbin Xu
Jiangbin Xu
NZNenggui Zhu
Nenggui Zhu
LHLi He
Li He

31 August 2020 in Polymers
Verified
Journal Article
Open access
PDF file
YZYuhui Zhou
Yuhui Zhou
LHLi He
Li He
WGWei Gong
Wei Gong
Three types of organic cage compounds, namely, cucurbit[6]uril (Q[6]), hemicucurbit[6]uril (HQ[6]), and β-cyclodextrin (BC), with different cavity structures as heterogeneous nucleation agents were selected for a polypropylene (PP) foaming injection molding process. The experimental results showed that Q[6] with a “natural” cavity structure possessed the best nucleation efficiency of these three cage compounds. The nucleation mechanism of organic cage compounds was explored through classical nucleation theory, molecular structure, and in situ visual injection molding analysis.