Javier Roberto Ticona Paucara

Dr. Javier Roberto Ticona Paucara

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 December 2023 in Remote Sensing
Verified
Journal Article
Open access
PDF file
BBBradford Butcher
Bradford Butcher
GWGabriel Walton
Gabriel Walton
RKRyan Kromer
Ryan Kromer
Edgard GonzalesEdgard Gonzales
Edgard Gonzales
JPJavier Roberto Ticona Paucara
Javier Roberto Ticona Paucara
AMArmando Minaya
Armando Minaya
Research on high-temporal-resolution rock slope monitoring has tended to focus on scenarios where spatial resolution is also high. Accordingly, there is a lack of understanding of the implications for rock slope monitoring results in cases with high temporal resolution but low spatial resolution, which is the focus of this study. This study uses automatically captured photos taken at a daily frequency by five fixed-base cameras in conjunction with multi-epoch Structure-from-Motion (SfM) photogrammetric processing techniques to evaluate changes in a rock slope in Majes, Arequipa, Peru. The results of the monitoring campaign demonstrate that there are potential issues with the common notion that higher frequency change detection is always superior. For lower spatial resolutions or when only large changes are of concern, using a high-frequency monitoring method may cause small volume changes that eventually aggrade into larger areas of change to be missed, whereas most of the total volume change would be captured with lower-frequency monitoring intervals. In this study, daily change detection and volume calculation resulted in a cumulative rockfall volume of 4300 m3 over about 14 months, while change detection and volume calculation between dates at the start and end of the 14-month period resulted in a total rockfall volume of 12,300 m3. High-frequency monitoring is still the most accurate approach for evaluating slope evolution from a rockfall frequency and size distribution perspective, and it allows for the detection of short accelerations and pre-failure deformations, but longer-term comparison intervals may be required in cases where spatial resolution is low relative to temporal resolution to more accurately reflect the total volume change of a given rock slope over a long period of time.

11 September 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
JYJihyun Yang
Jihyun Yang
JSJeffrey Shragge
Jeffrey Shragge
AGAaron Girard
Aaron Girard
Edgard GonzalesEdgard Gonzales
Edgard Gonzales
JPJavier Roberto Ticona Paucara
Javier Roberto Ticona Paucara
RKRichard Krahenbuhl
Richard Krahenbuhl
Seismic characterization of landslides offers the potential for developing high-resolution models on subsurface shear-wave velocity profile. However, seismic methods based on reflection processing are challenging to apply in such scenarios as a consequence of the disturbance to the often well-defined structural and stratigraphic layering by the landslide process itself. We evaluate the use of alternative seismic characterization methods based on elastic full waveform inversion (E-FWI) to probe the subsurface of a landslide complex in Majes, southern Peru, where recent agricultural development and irrigation activities have altered the hydrology and groundwater table and are thought to have contributed to increased regional landslide activities that present continuing sustainability community development challenges. We apply E-FWI to a 2D near-surface seismic data set for the purpose of better understanding the subsurface in the vicinity of a recent landslide location. We use seismic first-arrival travel-time tomography to generate the inputs required for E-FWI to generate the final high-resolution 2D compressional- and shear-wave (P- and S-wave) velocity models. At distances greater than 140 m from the cliff, the inverted models show a predominantly vertically stratified velocity structure with a low-velocity near-surface layer between 5–15 m depth. At distances closer than 140 m from the cliff, though, the models exhibit significantly reduced shear-wave velocities, stronger heterogeneity, and localized shorter wavelength structure in the top 20 m. These observations are consistent with those expected for a recent landslide complex; however, follow-on geotechnical analysis is required to confirm these assertions. Overall, the E-FWI seismic approach may be helpful for future landslide characterization projects and, when augmented with additional geophysical and geotechnical analyses, may allow for improved understanding of the hydrogeophysical properties associated with suspected ground-water-driven landslide activity.

4 April 2024 in Environmental Earth Sciences
Verified
Journal Article
Open access
PDF file
SSShaked Stein
Shaked Stein
BDBrandon Dugan
Brandon Dugan
Edgard GonzalesEdgard Gonzales
Edgard Gonzales
JPJavier Roberto Ticona Paucara
Javier Roberto Ticona Paucara
AMArmando Minaya
Armando Minaya
Water table rise near a cliff may trigger a landslide due to the associated increase pore pressure and decrease in frictional resistance. One main cause of water table rise is intense irrigation for agriculture in arid and semi-arid regions. One such case is in Majes, southern Peru, where a landslide has evolved near an intensively irrigated agricultural area. Mitigation strategies for landslides exist, such as physical strengthening of the cliff, but can be expensive. We describe a groundwater management approach to reduce the pore pressure in the vicinity of the cliff to either slow the propagation of an existing landslide or prevent the initiation of a new landslide. A 3D numerical groundwater flow model was built for the Majes area which employs the limited data existing on the local hydrogeology. Simulations were run to understand the connection between the hydraulic properties and the water table level change due to irrigation and pumping. Results show that through a series of pumping wells near the cliff edge, the pore pressure can be decreased effectively. Moreover, decreasing the water table via pumping can be accomplished in 25–35% of the time it took to elevate the water table level by irrigation. In addition, the pumping can capture water that could be reused for irrigation. Thus, based on our analysis, we conclude that wells could provide a groundwater management approach that keeps the pore pressure at low levels to mitigate landslide processes and simultaneously supplies water for irrigation existing and future irrigation-heavy agriculture in semi-arid environments.

8 August 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
Edgard GonzalesEdgard Gonzales
Edgard Gonzales
JPJavier Roberto Ticona Paucara
Javier Roberto Ticona Paucara
AMArmando Minaya
Armando Minaya
RKRichard Krahenbuhl
Richard Krahenbuhl
JSJeffrey Shragge
Jeffrey Shragge
HFHanna Flamme
Hanna Flamme
Cemented subsoils, commonly referred to as caliche, pose a regular challenge for agricultural development in arid and semi-arid regions like coastal southern Peru. These subsurface features restrict root penetration, limit water infiltration and hinder essential soil processes, ultimately reducing crop yields and agricultural productivity. Accurate and efficient mapping of caliche is important for optimizing land-use planning and implementing sustainable agricultural practices. This study presents the application of near-surface geophysical techniques for mapping caliche deposits in the context of agricultural development at the future Majes II site in the Arequipa region of southern Peru. Specifically, we employed high-frequency ground-penetrating radar (GPR) and frequency-domain electromagnetics (FDEM) at a testbed on the Majes II site to evaluate their ability to delineate the extent, thickness, and depth of caliche within the local geology. GPR offers high-resolution imaging, effectively capturing sharp contrasts between caliche and surrounding materials, providing detailed information on the thickness (approximately 0.4 m) and the depth (up to 1.5 m) of the caliche layers. FDEM provides valuable insights into the presence of caliche at a faster rate of data acquisition and processing, enabling rapid assessment of the extent of caliche deposits, although with the tradeoff of lower resolution and depth information. We demonstrate that these two geophysical methods can be used separately or in an integrated manner for collaborative interpretation at the Majes II site to inform land management decisions, including identifying areas with favorable conditions for crop production and implementing targeted interventions to mitigate the adverse effects of caliche on agricultural productivity.

29 August 2025 in Brazilian Journal of Geophysics
Verified
Journal Article
Closed access
JSJackeline Maria Mamani Sanchez
Jackeline Maria Mamani Sanchez
LTLady Diana Quispe Torres
Lady Diana Quispe Torres
EQEma Milagros Ticona Quispe
Ema Milagros Ticona Quispe
CQCristobal Condori Quispe
Cristobal Condori Quispe
Yawar HussainYawar Hussain
Yawar Hussain
GFGeorge Sand França
George Sand França
Being an important economic and industrial hub, Arequipa is the second most populous city in Peru, with over one million inhabitants. Within its metropolitan area, high-amplitude vibrations are generated by heavy construction machinery as well as by urban and commercial transportation. These vibrations pose a potential risk of damage to both urban and archaeological infrastructures. To assess possible structural impacts, vibration measurements were collected at significant sites and analyzed according to the DIN 4150- 3 standard. Ground vibrations attenuation was evaluated using the Levenberg-Marquardt inversion method. Regression adjustment models were developed, and the analysis of geometric and material damping coefficients was automated with the application of neural network algorithms, in areas with lower data density. The results indicate that vibrations caused by heavy machinery can damage sensitive or residential structures, as the peak particle velocity (PPV) exceeded 20 mm/s in these cases. However, for sources such as vehicular traffic on bridges and railway transport, the PPV only exceeded 10 mm/s. Attenuation analysis revealed that maximum particle velocity decreases with increasing distance from the source, and that the strongest damping occurs in the vertical component. Geometric damping (γ) values ranged from 0.1 to 1.65, and material damping (α) values ranged from 0.001 to 0.03 for the various sources evaluated. In cohesive soils, wave propagation is faster, which reduces tension in the foundations, whereas in sandy-silty soils, slower propagation increases the tension transmitted to the foundations. This research also aims to lay the foundation for the development of Peruvian regulations framework to assess structural damage caused by anthropogenic vibrations, since there are no existing regulations governing these effects on buildings. This study can help propose guidelines for the city of Arequipa.

16 November 2026 in Data
Verified
Journal Article
Open access
PDF file
HQHéctor Leopoldo Leopoldo Venegas Quiñones
Héctor Leopoldo Leopoldo Venegas Quiñones
Pablo Garcia-ChevesichPablo Garcia-Chevesich
Pablo Garcia-Chevesich
MADELEINE NATHALY GUILLEN GOMEZMADELEINE NATHALY GUILLEN GOMEZ
MADELEINE NATHALY GUILLEN GOMEZ
Edgard GonzalesEdgard Gonzales
Edgard Gonzales
JPJavier Roberto Ticona Paucara
Javier Roberto Ticona Paucara
JMJohn McCray
John McCray
Machine-learning models of groundwater levels are usually reported with a single accuracy score, yet that score depends on how data are split and on what a trivial predictor achieves. We assembled an analysis-ready dataset of more than 90,000 monthly depth-to-water observations from 644 monitoring wells across continental Chile (1982–2021), paired with 37 environmental and location predictors. Using a fixed modeling pipeline, we evaluated three tree-based learners under five train–test splitting designs (one random, two that withhold whole wells or regions, and two that withhold later records) and compared each with applicable baselines on the same test data. The best random-split model achieved R2 = 0.91, but a lookup of each well’s mean performed nearly as well, while temporal interpolation at the same well performed better. At withheld wells, the best learner roughly matched interpolation from neighboring wells; when whole regions were withheld, all learners had negative mean R2. Under a common calendar split, carrying forward each well’s last observation outperformed every learner at every evaluated horizon, although the learners’ R2 exceeded 0.8. Shuffled cross-validation also substantially understated chronological test error. These results show that a high accuracy score can reflect recognition of monitored wells rather than useful prediction at new locations or later times. Herein, we release the dataset, split assignments, predictions, and code as an open benchmark for evaluating groundwater models against validation designs and baselines matched to their intended use. Those results will help water managers judge when groundwater predictions are reliable enough to inform decisions.