Thermo-chemical networks using absorption and desorption to capture and valorise the potential of very low-grade residual heat (20 °C to 60 °C) to offer a reduction of end user costs and increased primary energy efficiency. The paper demonstrates the technical and economic potential of thermo-chemical networks by defining use cases and their related level of energy efficiency and technological feasibility. Furthermore, specific economic scenarios, including estimations on investment and operation costs, demonstrate the economic benefit of the technology. Simple payback periods between about 0.5 and 7.5 years indicate a good economic feasibility with end user costs below 4 €ct/kWh-equivalent and refunds of 0.5 to 1 €ct/kWh for the required residual heat. Due to the low-temperature characteristics of the relevant systems and services, detailed simulations are required to approve the functioning and viability of the new technology. For this purpose, the paper demonstrates the simulation outline using the example of space heating based on a low-temperature air heating system partially driven with thermo-chemical fuel.
Thermochemical-technology has high potential for utilizing surplus heat from industrial processes and renewables. This paper examines the economic potential and thermochemical-technology behavior at a network level. The city of Hasselt (Belgium), was chosen as a case study for technology application due to its typical mid-European urban structure. An integrated heating system was proposed which transports energy potential from available surplus-heat sources to the demand side over long distances by a thermochemical-district-heating network, which serves for building heating with heat-pump assistance. A dynamic simulation model of the thermochemical-technology was developed using the experiments and Hasselt data to determine the technology’s energy performance. To examine the technology’s feasibility in the context of a large district energy network, an economic and environmental evaluation of the thermochemical-technology was performed. To compare key economic parameters between our integrated technology and other heating systems a sensitivity analysis to identify favorable market-conditions for wider deployment of the proposed technology was performed. The simulations indicated a 72% reduction of heat-pump heating energy usage as a benefit of the thermochemical system. Network pumping-energy and thermochemical-fluid mass were found via simulation to be 80 kWh and 300 tons, respectively. In comparison to domestic-gas-boilers, the proposed technology shows 95% lower carbon emissions, however at 37% higher annualized cost.