To correlate the relationship between the Al distribution and the catalytic performance of long-chain olefin aromatization, several ZSM-5 zeolites with different Al locations and proximities were prepared via adjusting the hydrothermal synthesis conditions. Characterization by XRD, SEM and N2-adsorption indicated that all the as-prepared ZSM-5 zeolites exhibited high crystallinities, uniform morphologies and open channels. However, a great difference in the framework Al (AlF) positions was observed by 27Al MAS NMR and UV-vis-DRS of Co(II) ions, thus leading to the distinct acidity of various zeolites as determined by NH3-TPD and Py-IR. In 1-octene aromatization reaction, ZSM-5 catalysts exhibited significantly different catalytic performances and reaction pathways, which were closely related to the types and locations of the AlF atoms. The ZSM-5 zeolite catalyst with the most abundant single Al sites exhibited the lowest aromatics selectivity, while Al pairs in the framework were more favorable to the formation of aromatics. Moreover, the product distribution revealed that the Al pairs in the channel intersections of the ZSM-5 zeolite were responsible for the improved selectivity to heavy aromatics due to the fewer space restrictions; however, the Al pairs in the sinusoidal and straight channels with severe size restrictions suppressed the generation of bigger aromatics on the Al sites. This result provided a new potential method for precisely tailoring the catalytic selectivity in olefin conversion and upgrading the Fischer–Tropsch oil.
Ga-Doped ZSM-22 zeolites were synthesized successfully via a hydrothermal method by directly incorporating Ga species into the zeolite framework. It appeared that the as-prepared Ga-substituted zeolites possessed high crystallinity, uniform morphology and open pore structure. The XRD, FTIR, XPS as well as 71Ga and 29Si MAS NMR results confirmed the presence of Ga species in the framework of zeolites and the formation of the Ga–OH–Si group, thus leading to a significant decrease of Brønsted acidity because of the lower acidity of the Ga–OH–Si bridge hydroxyl compared to that of the Si–OH–Al group. These characteristics ensured that the Pt-loading [Al, Ga]-ZSM-22 catalyst exhibited lower cracking activity and higher selectivity (about 78.2% at 90.5% of conversion) in the n-dodecane isomerization than the parent Pt/ZSM-22 catalyst, due to the more balanced bifunctionality between acid sites and metal sites. DFT calculations revealed that Al and Ga incorporation was mostly prevalent at the T2, T3 and T4 sites, while Fe heteroatom substitution occurred equivalently in four sites. Bader charge analysis suggested that the acidity decreased in the order of Al-ZSM-22 > Ga-ZSM-22 > Fe-ZSM-22, and the cracking activity exhibited the order of Al-ZSM-22 ≫ Ga-ZSM-22 > Fe-ZSM-22. Therefore, it could be concluded that the isomerization was facilitated by the combination of the heteroatom location and the acidity strength. Remarkably, no significant decline of crystallinity and special surface area of Ga-doped zeolites was observed after the high temperature calcination, revealing higher stability of Ga than Fe in the zeolite framework.
29 July 2023 in Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy
Small Pt particles (about 1.2 nm) were highly dispersed on ZSM-22 zeolites via a strong electrostatic adsorption (SEA) method and exhibited a promotion effect on the catalytic performance in n-dodecane isomerization in comparison with the conventional catalyst. Several promoters (Ce, La, and Re) were introduced to further improve the aggregation resistance of the small Pt particles. A series of characterization including H2-TPR, XPS and STEM as well as DFT calculations provided solid evidence that the strong interaction between Pt and promoter species not only effectively hinders the Pt aggregation but also alters the electronic state of the Pt sites. Moreover, Ce and La promoters also lead to a slightly improved amount of B acid sites determined by Py-FTIR. Thus, improved activity and selectivity were achieved on a Ce-modified catalyst due to the better balanced bifunctionality between the slightly increased acidity of zeolites and electron-deficiency of Pt. The electron-rich Pt sites are responsible for the significant increase of CH4 selectivity and the decrease of total isomer selectivity in n-dodecane isomerization. In addition, a high-temperature reduction test revealed the higher isomerization activity and selectivity (about 10% higher than the unmodified catalyst) of the Ce-modified catalyst owing to the strong bond of Pt–O–Ce, further confirming the positive effect of the Ce promoter on the sintering resistance of small Pt particles.
ZSM-22 zeolite was desilicated and recrystallized to obtain a hierarchically porous material with well-established MCM-41 mesoporous structure on the outer surface. By choosing three different linear n-alkanes (n-heptane, n-dodecane, and n-hexadecane) as reactants, the impact of the MCM-41 mesoporous shell on isomerization performance was studied systematically. Compared with conventional and desilicated catalysts, the Pt-loaded recrystallized ZSM-22 catalyst exhibited lower cracking activity and rather higher isomerization selectivity. Detailed product analysis and kinetic study revealed that the isomerization activity was mainly determined by the interaction of hydrocarbon molecules in the confined reaction space with the channels of ZSM-22 zeolite. The Brønsted acid sites in the MCM-41 mesoporous shell in the recrystallized material also worked as active sites for the isomerization at high conversion leading to the significantly enhanced selectivity of multi-branched isomers due to the open mesoporous structure providing space for the formation of multi-branched isomers. Furthermore, with the diffusion restriction of the extra mesoporous shell, the residence time of reactants was prolonged, which promoted secondary isomerization at microporous pore openings. The Pt-loaded ZSM-22/MCM-41 hierarchically porous material was very attractive due to the high yield of multi-branched isomers, and the preferable hexadecane isomerization performance revealed its potential application in Fischer–Tropsch synthesis dewaxing processes.