A muon facility—EMuS (Experimental Muon Source)—at China Spallation Neutron Source (CSNS) has been studied since 2007. CSNS, which is designed to deliver a proton beam power of 100 kW at Phase-I, and will serve multidisciplinary research based on neutron scattering techniques, has just completed construction, and is ready to open to general users from September 2018. As an additional platform to CSNS, EMuS aims to provide different muon beams for multiple applications, among which, magnetism study by μSR techniques is a core part. By using innovative designs, such as a long target in conical shape situating in superconducting capture solenoids and forward collection method, EMuS can provide very intense muon beams with a proton beam of 5 kW and 1.6 GeV, from surface muons, decay muons, and high momentum muons to slow muons. In this article, the design aspects of EMuS, including general design, target station, muon beamlines, and μSR spectrometer, as well as prospects for applications on magnetism studies, will be reviewed.
CuAgSe is a promising thermoelectric material due to its superionicity. In this work, β-Cu1−xAg1−ySe (x =0, 0.02, and 0.04; y =0, 0.02, and 0.04) samples are synthesized by solid-state reaction method. The vacancies in samples are characterized by positron annihilation spectroscopy. Thereafter, the effects of vacancies on thermoelectric properties are investigated. The positron annihilation results reveal that Ag vacancies exist in the Ag-deficient samples (β-CuAg0.98Se and β-Cu0.98Ag0.98Se) but also in the Cu-deficient samples (β-Cu0.96AgSe and β-Cu0.98AgSe). For the Cu-deficient samples, the existence of Ag vacancies is attributed to the formation of impurity phases. For the nonstoichiometric samples, the vacancies are responsible for the decrease in the Seebeck coefficient in the temperature range from 300 to 400 K. However, for β-CuAgSe, no decrease in the Seebeck coefficient is observed due to the lack of extra holes, and electrons are still the majority carriers. For CuAgSe, the ZT value is mainly determined by the Seebeck coefficient. Therefore, for the nonstoichiometric samples, the ZT value reduces drastically with increasing temperature and drops to nearly zero at 400 K. In contrast, with the temperature increasing from 300 to 450 K, the ZT value of β-CuAgSe goes up from 0.4 to 0.5.
The quantum effect of light nuclei in materials is usually considered as lattice vibration and zero-point motion from an ab initio perspective. Here we start from full-quantized particles and take the muon as an example, considering the two-body quantized system of the muon and the electrons within two-component density functional theory, which can calculate the related two-body wave functions directly and automatically taking into account the quantum effect of the muon. We first simulate the two-body correlation energy and the pair-correlation function by quantum Monte Carlo, then construct a two-body self-consistent loop to solve the two-body density and then the hyperfine couplings are estimated. This is an attempt to reveal the quantum effect of light nuclei in materials from a different perspective. We finally find this fundamental method agrees better with experiments and shows good potential for further such calculations.
1 December 2019 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
A 128-channel positron detection system will be constructed at Experimental Muon Source (EMuS) of China Spallation Neutron Source (CSNS) to conduct muon spin rotation/relaxation/resonance ( μSR) measurements. Each detector channel consists of a scintillator, a light guide, and a photomultiplier tube (PMT). The long light guide is bent to an “L” shape to propagate optical photons from the scintillator to the PMT. A series of Geant4 simulations and experiments has been performed to optimize the light collection performance of the L-bent detector. Geometry deformation induced by the bending process has been well modeled. Simulation results agree with the experimental tests. Accordingly, a novel hybrid wrapping method (scintillator with polytetrafluoroethylene (PTFE) and light guide with aluminum tape) has been developed to improve the amplitude of detector signals greatly. Compared to wrapping the detector with merely PTFE tapes or aluminum tapes, this method leads to an enhancement in light collection efficiency of 73% or 14%, respectively. Two optimally manufactured prototype detectors using the novel wrapping method have been tested at the ISIS Muon Facility. The beam tests demonstrated that the L-bent detectors can precisely measure the behavior of muon spins inside samples. Therefore, the L-bent detector design is competent for μSR applications at CSNS/EMuS.