This paper presents a novel contact-aided flexure hinge (CAFH) with variable stiffness, which consists of a contact-aided segment, a flexible segment and a rigid part. The proposed CAFH can facilitate a compact design and provide an alternative for stiffness-variable designs under any loading conditions. With a mortise-tenon structure, the CAFH is trivially affected by friction. The design and deformation procedures of the CAFH are described in detail, followed by its theoretical kinetostatic modeling using the chained beam-constraint model. The deformation of all segments is considered in the kinetostatic model, which expands the space of design parameters for stiffness-variable designs. Then, the accuracy of the theoretical model and the variable stiffness design are verified by nonlinear finite element analysis (FEA) and experimental tests. In term of stiffness, the maximum relative errors of the theoretical model are 0.76% in Stage 1 and 0.70% in Stage 2, as compared with FEA, respectively. Further, the parameter sweep is carried out, followed by sensitivity analysis to identify the main test error sources. Finally, the multi-material scenarios are investigated preliminarily, and some outlooks are discussed.
29 June 2026 in Digital Intelligence in Agriculture
Plant factories, as agricultural production systems characterized by high yield, efficient resource utilization, and advanced mechanization, have attracted increasing global attention. Packaging finished vegetables is a critical pre-shipment operation in plant-factory production, and its automation and intelligent control remain urgent research needs. In vegetable-packaging line, an orientation-adjustment mechanism is required to correct the posture of packaged vegetables so that the boxing mechanism can place them neatly in turnover boxes. The operation of this mechanism depends on accurate identification of vegetable orientation. In this study, packaged vegetables produced in a plant factory were selected as the research object. Their postures on a conveyor belt were simulated, and images were acquired for orientation recognition. Multiple image features and classifiers were compared, and suitable texture features and classifiers were selected to identify the orientation of packaged vegetables. A translating-oscillating compound cam mechanism was designed according to the motion requirements for flipping packaged vegetables. The design process included determination of the follower motion law, generation of the cam profile curve, establishment of the cam model, and optimization of the structural parameters through a human-computer interaction framework. A prototype was then fabricated and assembled, and tests were conducted to verify the accuracy of the visual recognition system and the feasibility of the steering mechanism. The results showed that the GA-SVM classifier achieved a maximum accuracy of 97.90% with the fused HOG and GLCM features. The average accuracy of the recognition model was 95.27%, and the success rate of the steering mechanism was 94.67%. Both the recognition and steering performances were satisfactory. The proposed orientation-identification method and turning mechanism for packaged vegetables in plant factories were successfully implemented, providing a technical basis for unmanned plant-factory production lines.