Efficient and accurate prediction of the wind turbine dynamic wake is crucial for active wake control and load assessment in wind farms. This paper proposes a real-time dynamic wake prediction model for wind turbines based on a physics-guided neural network. The model can predict the instantaneous dynamic wake field under various operating conditions using only the inflow wind speed as input. The model utilizes Taylor's frozen-flow hypothesis and a steady-state wake model to convert instantaneous inflow wind speed and turbine parameters into neural network input features. A deep convolutional neural network then maps these features to desired wake field snapshots, enabling dynamic wake predictions for wind turbines. To train the model, we generated approximately 255 000 instantaneous flow field snapshots of single-turbine wakes using the large eddy simulation, covering different thrust coefficients and yaw angles. The model was trained using the supervised learning method and verified on the test set. The results indicate that the model can effectively predict the dynamic wake characteristics, including the dynamic wake meandering and the wake deflection of the yawed turbines. The model can also assess both the instantaneous wake velocity and the instantaneous wake center of a wind turbine. At a thrust coefficient of 0.75, the root mean square error for the predicted instantaneous wake velocity is around 6.53%, while the Pearson correlation coefficient for the predicted instantaneous wake center can reach 0.624. Furthermore, once the model is trained, its prediction accuracy does not decrease with the increase in the time span.
Wake effect is a significant factor contributing to power loss in wind farms. Studies have shown that wake steering control can mitigate this power loss. Currently, wind farm wake control strategies primarily utilize fixed yaw control due to limitations in the accuracy and efficiency of dynamic wake models. However, fixed yaw control fails to fully exploit the power improvement potential of wake steering control. Therefore, in this study, we first propose a dynamic wake model for wind farms based on the physics-guided neural network (PGNN) approach. This model can predict the dynamic wake flow field within wind farms in real time using instantaneous inflow wind speed and turbine operational states. Then, by employing the PGNN dynamic wake model as the predictive model, a wind farm dynamic wake control strategy based on the model predictive control method is proposed. To quantify the advantages of the proposed control strategy, both fixed yaw control and dynamic yaw control are tested on a wind farm with a 3 × 2 layout. Results from large eddy simulations demonstrate that the proposed dynamic wake control strategy increases the power output of the wind farm by 11.51% compared to a 6.56% increase achieved with fixed yaw control.
Stall flutter is a self-excited aeroelastic vibration phenomenon that occurs in lifting systems near the stall angle of attack, characterized by the distinct single-degree-of-freedom behavior. Despite its significance, this phenomenon remains not fully understood and is often vaguely attributed to nonlinear effects. To address this gap, the present study aims to reveal the underlying fluid–structure interaction mechanisms of stall flutter through global linear stability analysis (LSA). For this purpose, a reduced-order model (ROM)-based aeroelastic stability analysis framework is established using the autoregressive with exogenous input method. The ROM-based aeroelastic model provides a low-order representation of the coupled dynamics near the equilibrium steady state and can accurately capture the stability characteristics of the fluid-elastic system. It is found that as the angle of attack approaches the static stall angle, a low-frequency weakly stable fluid mode emerges, whose frequency is sufficiently lower than that of the von Kármán vortex shedding. The interaction between this fluid mode and the structure mode ultimately leads to the instability of the aeroelastic system at high reduced velocities, which is the fundamental cause of stall flutter. Moreover, dynamic mode decomposition is employed to successfully extract the spatial coherent structures and frequency characteristics of this low-frequency fluid mode, thereby confirming the validity of the LSA results. Further analysis indicates that, as the angle of attack decreases, this low-frequency fluid mode gradually weakens and eventually degenerates into more stable non-oscillatory fluid modes, resulting in structural stabilization and the cessation of stall flutter. Overall, the linear dynamic model accurately predicts the onset of instability and the vibration frequency of the airfoil, which challenges the traditional nonlinear perspectives and supports the feasibility of using linear control theory for stall flutter suppression in future research.
Analytical wake models play a crucial role in assessing wake effects, optimizing wind farm layouts, and enabling active wake control. However, conventional models primarily focus on the far-wake region and show limited accuracy in the near wake, restricting their applicability in modern compact wind farms. To address this, this study proposes a pressure-corrected double-Gaussian analytical wake model to improve prediction accuracy across the entire wake. Time-averaged wakes under different thrust coefficients and yaw angles are simulated using large-eddy simulation coupled with an actuator disk model with rotation. Based on the near-wake pressure distribution obtained from large-eddy simulation (LES), a pressure correction term is incorporated into the momentum conservation equation to construct the pressure-corrected double-Gaussian wake model. An analytical expression for the position of the minimum velocity in the wake is derived from mass conservation. The model requires only the wake expansion coefficient as an adjustable parameter. Comparison with LES data indicates that, relative to the uncorrected double-Gaussian model, the normalized root mean square error of wake velocity in the near-wake region, particularly near the rotor, is reduced from approximately 40% to below 13% of the inflow wind speed. The model successfully captures wake velocity distributions across different turbulence intensities, yaw angles, and tip speed ratios, demonstrating strong robustness and general applicability.
In the future war, robots can take the place of peacekeepers to fight in order to reduce casualties. Based on the structural characteristics of ants, the mechanical structure and control system of shooting hexapod robots have been designed in this paper. Three-dimensional modeling is created by SolidWorks. The control system is designed using HC-05 and Arduino mega2560. The new design of shooting hexapod robot can provide a solution for the future research and exploration of shooting robots.
With the rapid development of wind energy technology, complex terrain has become an important scenario for wind farm deployment. Under complex terrain conditions, wind turbine wake structures exhibit stronger nonlinear characteristics. Existing wake models therefore struggle to balance prediction accuracy and computational efficiency. To address this issue, this study proposes a high-fidelity wake prediction model for wind turbines in complex terrain based on feature transformation and data-driven fusion. First, a high-fidelity wake dataset covering different terrain slopes and operating conditions is constructed using large-eddy simulation combined with the immersed boundary method. A feature transformation module is then developed to convert inflow wind profile, thrust coefficient, and terrain information into a velocity deficit field and a terrain-induced background flow field with clear physical meaning. This process enhances the representation of key flow features. On this basis, a data-driven module is established to extract and fuse features from the two intermediate flow fields. As a result, fast and accurate prediction of wind turbine wakes in complex terrain can be achieved. In the generalization tests, the proposed model yields a mean absolute percentage error of only 4.20% compared with large eddy simulation results. In addition, compared with the BPA model coupled with the Coanda effect, the proposed model improves prediction accuracy by 83.00%.