Aim: To evaluate the chemical and physical properties of a tricalcium silicate root canal sealer containing povidone and polycarboxylate (BioRoot RCS), a calcium silicate MTA‐based sealer containing a salicylate resin (MTA Fillapex), a traditional eugenol‐containing sealer (Pulp Canal Sealer) and an epoxy resin‐based root canal sealer (AH Plus).Methodology: Calcium release, pH, setting time, water sorption, volume of open pores, volume of impervious portion, apparent porosity and weight loss were measured. The ability to nucleate calcium phosphates (CaP) after ageing 28 days in a simulated body fluid was evaluated using ESEM‐EDX and micro‐Raman spectroscopy. Data were statistically analysed (P = 0.05) using one‐way anova (setting time, radiopacity, solubility, water sorption, porosity) or two‐way anova (ion release tests).Results: BioRoot RCS had a final setting time of 300 min and adequate radiopacity (5.2 mm Al). It demonstrated the highest (P < 0.05) and more prolonged ability to release calcium ions (721 ppm at 3 h) and to increase the pH (11–12) (P < 0.05); B‐type carbonated apatite deposits were found on aged BioRoot RCS (biointeractivity‐related CaP‐forming ability). A final setting time of 270 min and good calcium release (17.4 ppm at 3 h) were measured for MTA Fillapex; apatite deposits were present on aged samples. No calcium release and no alkalizing activity were measured for Pulp Canal Sealer and AH Plus; no CaP nucleation was detected on aged Pulp Canal Sealer, and some apatite deposits were found on aged AH Plus (chemi/physisorption‐related CaP‐deposition). Higher and significantly different (P < 0.05) porosity, water sorption and solubility were measured for the two calcium silicate sealers, especially for BioRoot RCS.Conclusions: BioRoot RCS had bioactivity with calcium release, strong alkalizing activity and apatite‐forming ability, and adequate radiopacity.

The aim of the study was to analyze the chemical–physical properties and bioactivity (apatite-forming ability) of three recently introduced premixed bioceramic root canal sealers containing varied amounts of different calcium silicates (CaSi): a dicalcium and tricalcium silicate (1–10% and 20–30%)-containing sealer with zirconium dioxide and tricalcium aluminate (CERASEAL); a tricalcium silicate (5–15%)-containing sealer with zirconium dioxide, dimethyl sulfoxide and lithium carbonate (AH PLUS BIOCERAMIC) and a dicalcium and tricalcium silicate (10% and 25%)-containing sealer with calcium aluminate, tricalcium aluminate and tantalite (NEOSEALER FLO). An epoxy resin-based sealer (AH PLUS) was used as control. The initial and final setting times, radiopacity, flowability, film thickness, open pore volume, water absorption, solubility, calcium release and alkalizing activity were tested. The nucleation of calcium phosphates and/or apatite after 28 days aging in Hanks balanced salt solution (HBSS) was evaluated by ESEM-EDX, vibrational IR and micro-Raman spectroscopy. The analyses showed for NeoSealer Flo and AH Plus the longest final setting times (1344 ± 60 and 1300 ± 60 min, respectively), while shorter times for AH Plus Bioceramic and Ceraseal (660 ± 60 and 720 ± 60 min, respectively). Radiopacity, flowability and film thickness complied with ISO 6876/12 for all tested materials. A significantly higher open pore volume was observed for NeoSealer Flo, AH Plus Bioceramic and Ceraseal when compared to AH Plus (p < 0.05), significantly higher values were observed for NeoSealer Flo and AH Plus Bioceramic (p < 0.05). Ceraseal and AH Plus revealed the lowest solubility. All CaSi-containing sealers released calcium and alkalized the soaking water. After 28 days immersion in HBSS, ESEM-EDX analyses revealed the formation of a mineral layer that covered the surface of all bioceramic sealers, with a lower detection of radiopacifiers (Zirconium for Ceraseal and AH Plus Bioceramic, Tantalum for NeoSealer Flo) and an increase in calcium, phosphorous and carbon. The calcium phosphate (CaP) layer was more evident on NeoSealer Flo and AH Plus Bioceramic. IR and micro-Raman revealed the formation of calcium carbonate on the surface of all set materials. A thin layer of a CaP phase was detected only on AH Plus Bioceramic and NeoSealer Flo. Ceraseal did not show CaP deposit despite its highest calcium release among all the tested CaSi-containing sealers. In conclusion, CaSi-containing sealers met the required chemical and physical standards and released biologically relevant ions. Slight/limited apatite nucleation was observed in relation to the high carbonation processes.

Dental professionals often perform physically and mentally demanding therapeutical procedures. They work maintaining muscular imbalance and asymmetrical positions for a long time. The aim of the study was to describe the prevalence and the factors associated to work-related musculoskeletal disorders (WMSD) among Italian dental professionals and the most affected body regions. A cross-sectional observational study was conducted between March 2019 and February 2020. The Nordic Musculoskeletal questionnaire (NMQ) was implemented with questions related to working habits (dental occupation, working hours per week and per days, years of work) and lifestyle (practiced physical activity, including frequency and duration, mobilization activities, and knowledge of ergonomic guidelines) was used. The-chi square test was carried out to detect any statistically significant difference (p < 0.05). Logistic regression was carried out to detect the most significant factors associated to WMSD occurrence. A total of 284 questionnaires have been used for the analysis. A high proportion of dental professionals (84.6%) were affected by WMSD in the last 12 months. A higher prevalence was found in females (87%) when compared to males (80%). The prevalence of WMSD was correlated to the working hours/day and hour/week, with a higher risk for operators working >5 h/day and >30 h/week. In addition, a high prevalence was found in operators working for 2–5 years after graduation. Most of the surveyed dental professionals practiced physical activity (70.1%) but only a few had satisfactorily knowledge of ergonomic guidelines (12.7%). Interestingly, participants who practiced yoga or stretching as physical activities demonstrated lower WMSD (77%) when compared to other physical activities (84%). We can highlight that generic physical activities have no functional effect on WMSD for dental professionals. The most affected body areas were neck (59.9%), shoulders (43.3%), lumbar region (52.1%), dorsal region (37.7%) and wrists (30.6%). Considering the magnitude of the problem, there is an urgent need to implement the education in ergonomics among dental professionals, that may be achieved by teaching biomechanics, posturology and integrative functional therapies (such as yoga) during the university education and by promoting holistic health of dental operators.

Exosomes derived from mesenchymal stem cells are extracellular vesicles released to facilitate cell communication and function. Recently, polylactic acid (PLA), calcium silicates (CaSi), and dicalcium phosphate dihydrate (DCPD) have been used to produce bioresorbable functional mineral-doped porous scaffolds-through thermally induced phase separation technique, as materials for bone regeneration. The aim of this study was to investigate the effect of mineral-doped PLA-based porous scaffolds enriched with exosome vesicles (EVs) on osteogenic commitment of human adipose mesenchymal stem cells (hAD-MSCs). Two different mineral-doped scaffolds were produced: PLA-10CaSi-10DCPD and PLA-5CaSi-5DCPD. Scaffolds surface micromorphology was investigated by ESEM-EDX before and after 28 days immersion in simulated body fluid (HBSS). Exosomes were deposited on the surface of the scaffolds and the effect of exosome-enriched scaffolds on osteogenic commitment of hAD-MSCs cultured in proximity of the scaffolds has been evaluated by real time PCR. In addition, the biocompatibility was evaluated by direct-contact seeding hAD-MSCs on scaffolds surface-using MTT viability test. In both formulations, ESEM showed pores similar in shape (circular and elliptic) and size (from 10–30 µm diameter). The porosity of the scaffolds decreased after 28 days immersion in simulated body fluid. Mineral-doped scaffolds showed a dynamic surface and created a suitable bone-forming microenvironment. The presence of the mineral fillers increased the osteogenic commitment of hAD-MSCs. Exosomes were easily entrapped on the surface of the scaffolds and their presence improved gene expression of major markers of osteogenesis such as collagen type I, osteopontin, osteonectin, osteocalcin. The experimental scaffolds enriched with exosomes, in particular PLA-10CaSi-10DCPD, increased the osteogenic commitment of MSCs. In conclusion, the enrichment of bioresorbable functional scaffolds with exosomes is confirmed as a potential strategy to improve bone regeneration procedures.