ZnO thin films in nanorod (NR) and nanoflower (NF) morphologies were used as photoelectrode scaffolds for efficient visible-light-driven photoelectrochemical (PEC) water splitting process, where their decoration with copper indium gallium sulfide (CIGS) and indium sulfide () layers resulted in significant PEC performance enhancement. ZnO NF/CIGS/ photoelectrodes exhibited a remarkably high PEC efficiency ( applied bias photon-to-current efficiency, 83% incident photon-to-current efficiency) due to the negligible dark current, while ZnO NR/CIGS/ generated a photocurrent density of at 0.4 V (vs Ag/AgCl), being one of the highest performances reported in the literature for copper-based chalcopyrite photoelectrodes so far. The interfacial photoelectrode-electrolyte charge transport dynamics, investigated via intensity-modulated photocurrent spectroscopy, exhibited a sevenfold increase in charge transfer efficiencies with a significant drop in surface recombination kinetics for ZnO NF after CIGS/ decoration. The obtained results show consistency with numerically modeled electric field distribution profiles and electron paramagnetic resonance results of ZnO NF, rationalizing the enhanced charge transfer rates for decorated samples and confirming the defect passivating nature of CIGS/.
22 February 2024 in SiliconPV Conference Proceedings
Light-induced degradation (LID) and elevated temperature-induced degradation (LeTID) mechanisms negatively affect the performance of p-type Cz-Si-based solar cells. In this study, the degradation rates under illumination were investigated for non-metallized and metallized PERC cells with different base resistivities at different temperatures. These bifacial PERC cells are produced from own-produced ingots and wafers in a vertically integrated environment. The effect of different regeneration processes, using either illuminated annealing or direct current injection used in standard production against LID, is also investigated.
Solar power has become a cornerstone of the clean-energy transition, valued for its scalability, declining costs, and contribution to energy security. Its deployment continues to expand across utility, commercial, and residential sectors, supported by strong policy frameworks and increasingly mature supply chains. Despite these advances, the thermal sensitivity of photovoltaic (PV) modules remains a key limitation. High operating temperatures can reduce voltage, lower maximum power output, and accelerate material degradation, particularly in hot and high-irradiance regions. This chapter reviews strategies to address these challenges through engineered cooling solutions. A comprehensive assessment is presented of passive methods such as natural ventilation, heat sinks, phase-change materials, radiative coatings, floating PV, liquid immersion, and heat pipes. Comparative evidence highlights practical approaches for stabilizing PV temperatures, mitigating efficiency losses, and supporting long-term system reliability and sustainability.