Taking into account the existing physical ideas about the nature of molecular interactions, the effects of electric and magnetic fields on the mechanism of action of additives in oils, as well as raw...
Inverse problems occur in a wide range of scientific applications, such as in the fields of signal processing, medical imaging, or geophysics. This work aims to present to the field practitioners, in an accessible and concise way, several established and newer cutting-edge computational methods used in the field of inverse problems—and when and how these techniques should be employed.
31 August 2016 in Eastern-European Journal of Enterprise Technologies
This work provides a series of studies are aimed at determining the forces acting in the contact «wheel-rail» in curvilinear sections of the underground railway track. To define the dependence of the friction coefficient on the parameters of microgeometry of contact surfaces, the technique of laboratory tests on a friction machine was developed. The laboratory tests were carried out on the friction machine by testing specially made models, whose material directly and size in conversion corresponds to the components of the contact «wheel-rail». In order to determine parameters of force impact on model samples, calculation of contact voltages, which occur in the real contact under conditions of unlubricated friction and their conversion into the «modeling» contact were performed. As a result of testing, rational values of the friction coefficient and wear rate of the contact «wheel-rail’ at unlubricated friction under conditions of contacting in curvilinear sections of the underground railway trackwere defined.The obtained values of parameters of microgeometry of contacting surfaces under conditions of their practical implementation can significantly reduce the wear rate in the contact «wheel-rail» in curvilinear sections of the underground railway track. In turn, the decrease in wear rate will lead to the decrease in costs on maintenance of the underground railway track.
15 September 2018 in International Journal of Engineering & Technology
The problem of calculation and forecasting main parameters of aerosol lubricators designed for applying lubricants on angled to the horizon friction surfaces e.g. the lateral surfaces of a rail and a wheel flange of railway rolling stock is solved in the article. The main parameters of lubricators being considered in the article are compressed air supply, the geometry of a spray nozzle and the boundary thickness of a lubricant layer applied to the friction surface where there is no creep of a lubricant under the action of gravity. A structural model of application and retention of a lubricant on a friction surface has been proposed. A mathematical model to calculate main parameters of aerosol lubricators has been developed. The model establishes the connection between the geometry of lubricated friction surfaces, physico-chemical properties of lubricants and the diameter of nozzle aperture and the compressed air supply. The example of calculation of the boundary thickness of a lubricant layer applied to the friction surface under the condition of the absence of its creeping under the action of gravity has been presented in the article. The article presents the results of experimental studies the process of aerosol application of a lubricant to the friction surface.