Kathy Davenport

Dr. Kathy Davenport

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 December 2017 in Geophysical Journal International
Verified
Journal Article
Open access
PDF file
GBG D Beskardes
G D Beskardes
JHJ A Hole
J A Hole
KWK Wang
K Wang
MMM Michaelides
M Michaelides
QWQ Wu
Q Wu
DQD A Quiros
D A Quiros
Backprojection imaging has recently become a practical method for local earthquake detection and location due to the deployment of densely sampled, continuously recorded, local seismograph arrays. While backprojection sometimes utilizes the full seismic waveform, the waveforms are often pre-processed and simplified to overcome imaging challenges. Real data issues include aliased station spacing, inadequate array aperture, inaccurate velocity model, low signal-to-noise ratio, large noise bursts, and varying waveform polarity. We compare the performance of backprojection with four previously used data pre-processing methods: raw waveform, envelope, short-term averaging / long-term averaging (STA/LTA), and kurtosis. Our primary goal is to detect and locate events smaller than noise by stacking prior to detection to improve the signal-to-noise ratio. The objective is to identify an optimized strategy for automated imaging that is robust in the presence of real-data issues, has the lowest signal-to-noise thresholds for detection and for location, has the best spatial resolution of the source images, preserves magnitude, and considers computational cost. Imaging method performance is assessed using a real aftershock dataset recorded by the dense AIDA array following the 2011 Virginia earthquake. Our comparisons show that raw-waveform backprojection provides the best spatial resolution, preserves magnitude, and boosts signal to detect events smaller than noise, but is most sensitive to velocity error, polarity error, and noise bursts. On the other hand, the other methods avoid polarity error and reduce sensitivity to velocity error, but sacrifice spatial resolution and cannot effectively reduce noise by stacking. Of these, only kurtosis is insensitive to large noise bursts while being as efficient as the raw-waveform method to lower the detection threshold; however, it does not preserve the magnitude information. For automatic detection and location of events in a large dataset, we therefore recommend backprojecting kurtosis waveforms, followed by a second pass on the detected events using noise-filtered raw waveforms to achieve the best of all criteria.

24 January 2017 in Lithosphere
Verified
Journal Article
Closed access
KDKathy Davenport
Kathy Davenport
JHJ.A. Hole
J.A. Hole
BTB. Tikoff
B. Tikoff
RRR.M. Russo
R.M. Russo
SHS.H. Harder
S.H. Harder

28 March 2017 in Journal of Geophysical Research: Solid Earth
Verified
Journal Article
Open access
PDF file
DQD. A. Quiros
D. A. Quiros
LBL. D. Brown
L. D. Brown
KDKathy Davenport
Kathy Davenport
JHJ. A. Hole
J. A. Hole
ACA. Cabolova
A. Cabolova
WMW. D. Mooney
W. D. Mooney
The Mw 5.8 earthquake that occurred in Louisa County, Virginia, on 23 August 2011 provided an opportunity to record with several “high density” seismic arrays, in addition to traditional, sparse temporary seismic networks. Traditional aftershock networks consist of a few dozen stations spread over tens of kilometers. As a result, the recorded seismic waveforms suffer from spatial aliasing that is so severe that many types of waveform processing are not applicable. Here we report the results of recording with a large number of oil industry‐type instruments deployed at a spacing that is an order of magnitude closer than in traditional deployments. The objective was to image subsurface structure with array methods, using the aftershocks as sources. The dense array recorded continuously for 12 days and consisted of 172 vertical component seismometers that were placed at 200–400 m and a 60 km long three‐component regional profile with stations every 2 km. We demonstrate how processing techniques from Vertical Seismic Profiling can produce high‐resolution 3‐D reflection images of structure beneath the array. These images display reflectivity that correlates with that observed on a nearby deep reflection survey collected by the U.S. Geological Survey. Of particular interest is a strong reflector imaged across multiple profiles. Our analysis demonstrates how a surface array of seismometers can provide 3‐D images of structure using microearthquake sources when wavefields are sampled sufficiently densely.

25 December 2018 in Geosciences
Verified
Journal Article
Open access
PDF file
BLBrandi Lenz
Brandi Lenz
DSDerek Sawyer
Derek Sawyer
BPBenjamin Phrampus
Benjamin Phrampus
KDKathy Davenport
Kathy Davenport
ALAshley Long
Ashley Long
A series of large blocks from the 44-North Slide, offshore Oregon, impacted the seafloor with sufficient force to induce a broad zone of deformation. In 2017, we acquired a seismic profile from the headwall area to the outer toe of this slide. Previous work identified this slide, but it has not been imaged at high resolution before this survey. A striking surficial feature is a collection of blocks that lie downslope from an amphitheater-shaped headwall. The blocks traveled up to 20-km horizontally and about 1200-m vertically down a 13° slope and now cover an area of ~100 km2. The blocks have rough and angular edges that extend up to 400-m above the surrounding seafloor. Seaward of the blocks, a 10-km zone of sediment is deformed, horizontally shortened by 8%. We interpret the strain field to be a result of the dynamic impact forces of the slide. This suggests a high-mobility failure with tsunamigenic potential. It is unclear what preconditioned and triggered this event, however, earthquake-induced failure is one possibility. Gas hydrate dissociation may have also played a role due to the presence of a bottom-simulating reflector beneath the source area. This study underscores the need to understand the dynamic processes of submarine landslides to more accurately estimate their societal impacts.

7 February 2022 in Journal of Geophysical Research: Solid Earth
Verified
Journal Article
Open access
PDF file
EME. K. Myers
E. K. Myers
ERE. C. Roland
E. C. Roland
ATA. M. Tréhu
A. M. Tréhu
KDKathy Davenport
Kathy Davenport
The Peru‐Chile subduction zone hosts M > 8 earthquakes as well as multiple ridges on the downgoing Nazca plate, making this region well suited for investigating the formation, evolution, and potential impacts of subducting features on seismogenesis. To evaluate the physical properties and structural variability of the Iquique Ridge offshore northern Chile, we present a P wave velocity model of the Nazca plate and Iquique Ridge outboard of the 2014 M 8.1 Iquique earthquake sequence. 2D tomographic inversions of P wave traveltime data from the 2016 PICTURES (Pisagua/Iquique Crustal Tomography to Understand the Region of the Earthquake Source) controlled‐source experiment indicate that the Iquique Ridge is characterized by significant crustal thickening relative to typical Nazca plate oceanic crust, with a maximum thickness of ∼13 km beneath the most prominent portion of the Iquique Ridge and outer rise. Reduced upper crustal seismic velocities extend from the ridge eastward to the trench, which may indicate increased fracturing and/or hydration during plate bending. Corresponding multi‐channel seismic reflection data show along‐profile structural variation as well, including an intermittent Moho reflector near the onset of crustal thickening and faulting along the landward slope. The structural heterogeneity entering the Peru‐Chile Trench has potential implications for slip behavior at depth assuming that the anomalous crustal structure continues beneath the forearc. We suggest that the increased buoyant normal force associated with discrete subducted Iquique Ridge seamounts similar to the zone of thick crust imaged here could lead to localized increased interplate coupling, while entrained sediment and fractured/altered crust could facilitate aseismic slip.

3 November 2016 in Geochemistry, Geophysics, Geosystems
Verified
Journal Article
Open access
PDF file
LHLiang Han
Liang Han
JHJohn A. Hole
John A. Hole
JSJoann M. Stock
Joann M. Stock
GFGary S. Fuis
Gary S. Fuis
CWColin F. Williams
Colin F. Williams
ALAmanda J. Livers
Amanda J. Livers
Plate‐boundary rifting between transform faults is opening the Imperial Valley of southern California and the rift is rapidly filling with sediment from the Colorado River. Three 65–90 km long seismic refraction profiles across and along the valley, acquired as part of the 2011 Salton Seismic Imaging Project, were analyzed to constrain upper crustal structure and the transition from sediment to underlying crystalline rock. Both first arrival travel‐time tomography and frequency‐domain full‐waveform inversion were applied to provide P‐wave velocity models down to ∼7 km depth. The valley margins are fault‐bounded, beyond which thinner sediment has been deposited on preexisting crystalline rocks. Within the central basin, seismic velocity increases continuously from ∼1.8 km/s sediment at the surface to >6 km/s crystalline rock with no sharp discontinuity. Borehole data show young sediment is progressively metamorphosed into crystalline rock. The seismic velocity gradient with depth decreases approximately at the 4 km/s contour, which coincides with changes in the porosity and density gradient in borehole core samples. This change occurs at ∼3 km depth in most of the valley, but at only ∼1.5 km depth in the Salton Sea geothermal field. We interpret progressive metamorphism caused by high heat flow to be creating new crystalline crust throughout the valley at a rate comparable to the ≥2 km/Myr sedimentation rate. The newly formed crystalline crust extends to at least 7–8 km depth, and it is shallower and faster where heat flow is higher. Most of the active seismicity occurs within this new crust.