A new composite, kaolin/sodium alginate-grafted poly(acrylic acid- co-2-acrylamido-2-methyl-1-propane sulfonic acid) (KL/SA- g-P(AA- co-AMPS)), was synthesized by intercalation graft polymerization of KL, SA, partially neutralized AA, and AMPS, using ammonium persulfate as an initiator and N, N′-methylenebisacrylamide as a cross-linker. The composite was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis. Possible mechanisms for the process of intercalation graft polymerization were speculated. The composite was used for the removal of heavy metal ions from aqueous solutions. Sorption behavior of heavy metal ions such as lead (Pb2+), cadmium (Cd2+), and zinc (Zn2+) on (KL/SA- g-P(AA- co-AMPS) was investigated. Maximal adsorption capacities for Pb2+, Cd2+, and Zn2+ ions were 834.7, 69.9, and 139.8 mg g−1, respectively. It was found that the adsorption of Pb2+ and Zn2+ ions was in agreement with the Freundlich model, whereas that of Cd2+ ion was consistent with both Langmuir and Freundlich models. Mechanisms for the adsorption process were also discussed. It indicated that chelation played an important role for the adsorption of Pb2+ ions, while ion exchange was decisive for the adsorption of Zn2+ and Cd2+ ions. It has been concluded that KL/SA- g-P(AA- co-AMPS) hydrogel composite offered excellent potential for the removal of heavy metal ions from contaminated water. In addition, the hydrogel composite could be regenerated and reused in wastewater treatment.
Chitosan graft poly (acrylic acid-co-2-acrylamide-2-methylpropanesulfonic acid)/graphite oxide (CTS-g-P(AA-co-AMPS)/GO) composite hydrogel is synthesized and used to remove rhodamine 6G (R6G) and methyl violet (MV) from aqueous solutions by adsorption. The composite is characterized by infrared spectroscopy (IR), powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The effect of the adsorption conditions, including the amount of graphite oxide (GO), the initial concentration of dye solutions, the adsorption time, ionic strength, and the mass of the composite, on the adsorption capacities has been studied in detail. It can be seen that small amount of GO can improve the adsorption capacities of both dyes. It is found that the adsorption capacities of R6G and MV can be increased by 57.26% and 26.39%, respectively, compared with CTS-g-P(AA-co-AMPS graft copolymer. The maximal adsorption capacity of R6G and MV is 625.3 and 326.4 mg/g, respectively. The interaction between GO and dye molecules are speculated. GO acts as crosslinking points and combine with the CTS-g-P(AA-co-AMPS) graft copolymer through hydrogen bonds and electrostatic actions. The adsorption isotherms and thermodynamics are discussed. The Gibbs free energy of R6G and MV is that △GR6GӨ = −2.478 KJ/mol and △GMVӨ = −2.577 KJ/mol and it indicates that the adsorption of R6G and MV on CTS-g-P(AA-co-AMPS)/GO is spontaneous and satisfied the Redlich-Peterson equation. Kinetic studies show that the adsorption is in accordance with the Lagergren pseudo first-order kinetic model.