The prediction of bio-oil yield from pyrolysis of lignocellulosic biomass is important for processes optimization, modeling, and installation’s design. This work models the bio-oil of lignocellulosic biomass yield by Artificial Neural Networks (ANN), being the inputs: cellulose, hemicellulose, lignin, pyrolysis temperature, heating rate, N2 flow rate, and particle size. A database was created with 34 biomass types, modeling with 329 samples, training with 80%, and validating with 20%. A previous stage of screening was carried out with 100% of data for choosing the algorithm of the second phase and the number of neurons in the hidden layer; the selection criteria were the mean absolute error (MAE) and the correlation coefficient. The best performance was for backpropagation/Levenberg-Marquardt with 7:13:1 as ANN architecture. All ANN with less than 1% of MAE were tested for validating and the weight’s matrix of the best one is shown. The selected network with a correlation coefficient of 0.9739 and MAE of 1.7159% for validation, only had four outlier values between 5 and 6%, the remaining 62 samples with all 263 used in training, had less than 5% of difference compared to the experimental values, thus representing a very accurate model for predicting bio-oil yield.
12 October 2017 in Chemical Engineering & Technology
Biomass incineration residues may be used for CO2 capture and storage by carbonation of waste-borne metal hydroxides. Moist carbonation of these ashes can be performed under mild conditions (ambient pressure and temperature) and accelerated by using a CO2-rich gas. The process requires the wetting of the typically dry-discharged ashes and highly depends on the moisture content. Handling of the moist ashes in continuously operated reactors is challenging, especially due to build-up of incrustations. In this study, the carbonation of biomass bottom ash was performed in fixed-bed and rotating drum reactors. Wetting was performed either manually prior to fixed-bed carbonation or with spray-nozzles. The moisture dependent CO2 uptake was evaluated by a gas balance. Results show that the CO2 uptake in the fixed-bed and rotating drum was consistently between 20 and 35 g/kg, although the CO2 concentration in the rotating drum was significantly lower (10 vol% vs. 100 vol%). In the fixed bed, the uptake strongly depended on the moisture content, while in the rotating drum the effect was less pronounced. Application of such rotating drums allows for a continuous solids feed while combining wetting and carbonation.