is a very useful radioisotope, which is used in nearly 80% of all nuclear medicine procedures. is produced from 99Mo decay. A potentially advantageous alternative to meeting current and future demand for 99Mo is the use of Aqueous Homogeneous Reactors (AHR). In this paper, a thermal-hydraulics study of the core of a 75 kWth AHR conceptual design based on the ARGUS reactor for 99Mo production is presented. As the ARGUS heat removal systems were designed for working at 20 kWth, the main objective of the thermal-hydraulics study was evaluating the heat removal systems in order to show that sufficient cooling capacity exists to prevent fuel solution overheating. The numerical simulations of an AHR model were carried out using the Computational Fluid Dynamic (CFD) code ANSYS CFX 14. Evaluation shows that the ARGUS heat removal systems working at 75 kWth are not able to provide sufficient cooling capacity to prevent fuel solution overheating. To solve this problem, the number of coiled cooling pipes inside the core was increased from one to five. The results of the CFD simulations with this modification in the design show that acceptable temperature distributions can be obtained.
29 September 2024 in European Journal of Soil Science
This paper is part of the ongoing efforts to contribute to the thermal-hydraulic analysis of one of the most promising alternatives to produce medical isotopes and meeting current and future demand for
6 October 2024 in Journal of Environmental Analysis and Progress
Wastewater filtration for reuse is a practice applied to conserve water resources. However, its effectiveness is directly related to the permeability of the filter, which can be compromised by clogging processes due to the retention of suspended particles or by precipitated materials during the process of removing chemical contaminants. This study investigates the porous structure of filter layers by different techniques. The study explores porosity in porous media, emphasizing the importance of pores and the interconnected matrix. To evaluate the porosity, fluid injection techniques, fluid saturation techniques and XR-?CT were employed for porosity determination. It hypothesizes that fluid injection techniques, volumetric measurements, and imaging methods differ in their ability to accurately determine porosity. Nine reference columns of three different porous arrangements were mounted in an acrylic cylinder to study the sensitivity of the techniques to different sizes of matrix arrangements. Finally, the porosity results were compared statistically to determine the error. Fluid injection and saturation techniques are cost-effective methods for determining effective layer porosity. However, experimental studies show that water-based techniques often yield higher porosity values than helium gas porosimetry. This discrepancy may be attributed to operational errors inherent to the experimental method, leading to an overestimation of porosity. XR-?CT and gas porosimetry have been shown to be more suitable for quantifying smaller pores. Furthermore, XR-?CT allows for a deeper characterization of the porous medium, such as the determination of local porosity, and the application of fluid simulation techniques to observe the permeability and tortuosity of the medium.