Polyethylene terephthalate (PET) waste was depolymerized into bis(2-hydroxyethyl) terephthalate (BHET) through glycolysis with the aid of oyster shell-derived catalysts. The equilibrium yield of BHET was as high as 68.6% under the reaction conditions of mass ratios (EG to PET = 5, catalyst to PET = 0.01) at 195 °C for 1 h. Although biomass-derived Ca-based catalysts were used for PET glycolysis to obtain BHET monomers, no statistical analysis was performed to optimize the reaction conditions. Thus, in this study, we applied response surface methodology (RSM) based on three-factor Box–Behnken design (BBD) to investigate the optimal conditions for glycolysis by analyzing the independent and interactive effects of the factors, respectively. Three independent factors of interest include reaction time, temperature, and mass ratio of catalyst to PET under a fixed amount of ethylene glycol (mass ratio of EG to PET = 5) due to the saturation of the yield above the mass ratio. The quadratic regression equation was calculated for predicting the yield of BHET, which was in good agreement with the experimental data (R2 = 0.989). The contour and response surface plots showed the interaction effect between three variables and the BHET yield with the maximum average yield of monomer (64.98%) under reaction conditions of 1 wt% of mass ratio (catalyst to PET), 195 °C, and 45 min. Both the experimental results and the analyses of the response surfaces revealed that the interaction effects of reaction temperature vs. time and temperature vs. mass ratio of the catalyst to the PET were more prominent in comparison to reaction time vs. mass ratio of the catalyst to the PET.
Yolk–shell nanostructures have attracted tremendous research interest due to their physicochemical properties and unique morphological features stemming from a movable core within a hollow shell. The structural potential for tuning inner space is the focal point of the yolk–shell nanostructures in a way that they can solve the long-lasted problem such as volume expansion and deterioration of lithium-ion battery electrodes. This review gives a comprehensive overview of the design, synthesis, and battery anode applications of yolk–shell nanostructures. The synthetic strategies for yolk–shell nanostructures consist of two categories: templating and self-templating methods. While the templating approach is straightforward in a way that the inner void is formed by removing the sacrificial layer, the self-templating methods cover various different strategies including galvanic replacement, Kirkendall effect, Ostwald ripening, partial removal of core, core injection, core contraction, and surface-protected etching. The battery anode applications of yolk–shell nanostructures are discussed by dividing into alloying and conversion types with details on the synthetic strategies. A successful design of yolk–shell nanostructures battery anodes achieved the improved reversible capacity compared to their bare morphologies (e.g., no capacity retention in 300 cycles for Si@C yolk–shell vs. capacity fading in 10 cycles for Si@C core–shell). This review ends with a summary and concluding remark yolk–shell nanostructures.
As a new class of two-dimensional materials, two-dimensional (2D) heterostructures constructed from metal chalcogenides (MCs) have been gaining tremendous attention due to their unprecedented physical and chemical phenomena, mainly originated from their distinct structural features such as composition, architecture type, spatial arrangement of each component, crystal structure, exposed facet and interface, dimensionality in their heterostructures. Towards the realization of practical applications, synthetic approaches need a rational design with a variety of architecture types including laterally-combined, vertically-aligned, and conformally-coated 2D MC heterostructures. Among various synthetic routes, solution-based synthesis is thought of as an alternative to fabrication through high-cost setups since it can control those structural features in a cheap fashion. This review presents recent progress on solution-based synthesis to produce various 2D MC heterostructures with a focus on the synthetic fundamentals in terms of thermodynamic and kinetic aspects related to the growth mechanism. Four different synthetic approaches are reviewed: seeded growth, cation exchange reaction, colloidal atomic layer deposition, direct synthesis including one-step process and modified electrochemical method. We also provide some representative applications of 2D MC heterostructures and their hybrid composites in various fields including optoelectronics, thermoelectrics, catalysis, and battery. Finally, we offer an insight into challenges and future directions in a synthetic improvement of 2D MC heterostructures.
Ultrathin Te nanowire (NW) and Au nanosheet (NS) was assembled as two-dimensional macroscale films. The AuNS–Ag2TeNW–AuNS device is applicable to wearable resistive switching device due to their paper-like flexibility.
1 January 2019 in Colloids and Surfaces B: Biointerfaces
This paper introduces a new fibrous system for synergistic cancer therapy, which consists of gold nanocage (AuNC)-loaded poly(ε-caprolactone) (PCL) fibers with encapsulation of a chemotherapeutic anticancer drug in their core and loading of a phase-changeable fatty acid in their sheath. Under on–off switching of near-infrared (NIR) light irradiation, the excellent photothermal ability and photostability of AuNCs allows repeated, significant heating of the fibers to a temperature available to hyperthermia. Simultaneously, the NIR light-induced heat generation enables the melting out of the loaded fatty acid, leading to a rapid release of the drug molecules from the fibers. The combination of this NIR light-triggered drug release with the repeated hyperthermia treatment exhibits excellent anticancer efficacy.