ZNS SSDs divide the storage space into sequential-write zones, reducing costs of DRAM utilization, garbage collection, and over-provisioning. The sequential-write feature of zones is well-suited for LSM-based databases, where random writes are organized into sequential writes to improve performance. However, the current compaction mechanism of LSM-tree results in widely varying access frequencies (i.e., hotness) of data and thus incurs an extreme imbalance in the distribution of erasure counts across zones. The imbalance significantly limits the lifetime of SSDs. Moreover, the current zone-reset method involves a large number of unnecessary erase operations on unused blocks, further shortening the SSD lifetime. Considering the access pattern of LSM-tree, this article proposes a wear-aware zone-management technique, termed WA-Zone , to effectively balance inter- and intra-zone wear in ZNS SSDs. In WA-Zone, a wear-aware zone allocator is first proposed to dynamically allocate data with different hotness to zones with corresponding lifetimes, enabling an even distribution of the erasure counts across zones. Then, a partial-erase-based zone-reset method is presented to avoid unnecessary erase operations. Furthermore, because the novel zone-reset method might lead to an unbalanced distribution of erasure counts across blocks in a zone, a wear-aware block allocator is proposed. Experimental results based on the FEMU emulator demonstrate the proposed WA-Zone enhances the ZNS-SSD lifetime by 5.23×, compared with the baseline scheme.

Vehicle sensor networks (VSNs) are ushering in a promising future by enabling more intelligent transportation systems and providing a more efficient driving experience. However, because of their inherent openness, VSNs are subject to a large number of potential security threats. Although various authentication schemes have been proposed for addressing security problems, they are not suitable for VSN applications because of their high computation and communication costs. Chuang and Lee have developed a trust-extended authentication mechanism (TEAM) for vehicle-to-vehicle communication using a transitive trust relationship, which they claim can resist various attacks. However, it fails to counter internal attacks because of the utilization of a shared secret key. In this paper, to eliminate the vulnerability of TEAM, an enhanced privacy-preserving authentication scheme for VSNs is constructed. The security of our proposed scheme is proven under the random oracle model based on the assumption of the computational Diffie–Hellman problem.

Security and efficiency are the two main challenges for designing a smart home system. In this paper, by incorporating Chinese remainder theorem (CRT) into the elliptic curve Diffie–Hellman (ECDH), a lightweight key agreement protocol for smart home systems is constructed. Firstly, one-way hash authentication is used to identify the sensor nodes instead of mutual authentication to reduce the authentication cost. Secondly, the CRT is introduced to enhance the security of the original ECDH key agreement. Security analysis showed that the proposed protocol can validate the data integrity and resist the replay attack, the man-in-middle attack, and other attacks. Performance analysis and experiments showed that the protocol achieves high security with low communication and computation costs, and can be implemented in smart home systems.

The NVMe Zoned Namespace (ZNS) is a high-performance interface for flash-based solid-state drives (SSDs), which divides the logical address space into fixed-size and sequential-write zones. Meanwhile, ZNS SSDs eliminate in-device garbage collection (GC) by shifting the responsibility of GC to the host. However, the host-side GC of ZNS SSDs is not efficient. On the one hand, data migration during GC first moves data to the host buffer and then writes back the transferred data to the new location in the SSD, resulting in an unnecessary end-to-end transfer overhead. On the other hand, due to the pre-configured mapping between zones and blocks, GC incurs a large block-to-block rewrite overhead, i.e., even if most of the data in a block of the victim zone is valid, the valid data will still be rewritten to another block in the target zone. To address these issues, this article proposes a novel ZNS SSD design that features dynamic zone mapping, termed Brick-ZNS . Brick-ZNS implements two key functionalities: in-storage data migration and address remapping. New ZNS commands are first designed to realize in-storage data migration to avoid the end-to-end transfer overhead of GC while ensuring performance predictability. Then, a remapping strategy exploiting parallel physical blocks is proposed to reduce the large block-to-block rewrite overhead while ensuring zone-level access parallelism. The basic idea of the strategy is to directly remap the parallel physical blocks with a sufficient amount of valid data in the victim zone to the target zone, hence avoiding the large block-to-block rewrite overhead. Based on a full-stack SSD emulator, the evaluation results show that Brick-ZNS improves write throughput by 25% and SSD lifetime by 1.41×.

With the integrated development of the Internet, wireless sensor technology, cloud computing, and mobile Internet, there has been a lot of attention given to research about and applications of the Internet of Things. A Wireless Sensor Network (WSN) is one of the important information technologies in the Internet of Things; it integrates multi-technology to detect and gather information in a network environment by mutual cooperation, using a variety of methods to process and analyze data, implement awareness, and perform tests. This paper mainly researches the localization algorithm of sensor nodes in a wireless sensor network. Firstly, a multi-granularity region partition is proposed to divide the location region. In the range-based method, the RSSI (Received Signal Strength indicator, RSSI) is used to estimate distance. The optimal RSSI value is computed by the Gaussian fitting method. Furthermore, a Voronoi diagram is characterized by the use of dividing region. Rach anchor node is regarded as the center of each region; the whole position region is divided into several regions and the sub-region of neighboring nodes is combined into triangles while the unknown node is locked in the ultimate area. Secondly, the multi-granularity regional division and Lagrange multiplier method are used to calculate the final coordinates. Because nodes are influenced by many factors in the practical application, two kinds of positioning methods are designed. When the unknown node is inside positioning unit, we use the method of vector similarity. Moreover, we use the centroid algorithm to calculate the ultimate coordinates of unknown node. When the unknown node is outside positioning unit, we establish a Lagrange equation containing the constraint condition to calculate the first coordinates. Furthermore, we use the Taylor expansion formula to correct the coordinates of the unknown node. In addition, this localization method has been validated by establishing the real environment.