ISMAILLA HAMED RIYAP

Dr. ISMAILLA HAMED RIYAP


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 December 2024 in Discover Civil Engineering
Verified
Journal Article
Open access
PDF file
AMAimard Manfred Njawa Moudio
Aimard Manfred Njawa Moudio
IRISMAILLA HAMED RIYAP
ISMAILLA HAMED RIYAP
JSJean Mermoz Siewé
Jean Mermoz Siewé
HTHervé Kouamo Tchakouté
Hervé Kouamo Tchakouté
CNCharles Peguy Nanseu Njiki
Charles Peguy Nanseu Njiki
Pengkun HouPengkun Hou
Pengkun Hou
This study evaluates the influence of the CaO/Al2O3 molar ratio of synthetic calcium aluminate hydrates on the properties of alkali-activated materials based on metakaolin. Calcium aluminate hydrates with CaO/Al2O3 molar ratios of 0.4, 0.6, 0.8, 1.0 and 1.2 were synthesised from bauxite and eggshells. Alkali-activated materials were prepared in which metakaolin was replaced by 0 and 10 wt.% calcium hydroxide and calcium aluminate hydrate with different CaO/Al2O3 molar ratios. Rice husk ash with a SiO2/Na2O molar ratio of 1.6 was used for the preparation of the hardener. The 28-day compressive strengths of alkali-activated materials containing 0 and 10 wt.% calcium aluminate hydrate with different CaO/Al2O3 molar ratios of 0, 0.4, 0.6, 0.8, 1.0 and 1.2 are 48.86, 63.59, 47.36, 47.89, 34.66 and 32.76 MPa, respectively. 22.08 MPa for that containing 10% by weight of calcium hydroxide. The apparent densities are 1.87, 1.79, 1.99 and 2.10 g/cm3, respectively. It has been found that the best molar ratio of CaO to Al2O3 in the structure of the 10% by weight of calcium aluminate hydrate used to replace metakaolin, which is required to produce alkali-activated materials with higher mechanical and physical properties, is about 0.4. Highlights Calcium aluminate hydrates (CAHs) with molar ratio CaO/Al2O3 of 0.4, 0.6, 0.8, 1.0 and 1.2 were prepared using calcined bauxite, calcined eggshell and distillated water. Calcium hydroxide (CH) was prepared using calcined eggshell and distillated water. Metakaolin was substituted by 0 and 10 wt.% of CH and the different CAHs. The highest strength was archived at 63.59 MPa for alkali-activated material using CAH with molar ratio CaO/Al2O3 of 0.4 as additive.

1 October 2026 in Discover Civil Engineering
Verified
Journal Article
Open access
PDF file
CDCédric Mbiakop Dieuhou
Cédric Mbiakop Dieuhou
FWFengnian Wu
Fengnian Wu
DNDimace Lionel Vofo Ngnintedem
Dimace Lionel Vofo Ngnintedem
IRISMAILLA HAMED RIYAP
ISMAILLA HAMED RIYAP
JTJean Jacques Kouadjo Tchekwagep
Jean Jacques Kouadjo Tchekwagep
PHPengkun Hou
Pengkun Hou
This research explores the synergistic effect of adding silica sand powders of various particle sizes (45, 63, 125 and 200 μm) to un-burnt and burnt recycled fired-clay brick wastes. The study examines the impact of the powders of silica sand on the compressive strength and microscopic pore structure of geopolymers. The addition of 4 wt% of each particle size of silica sand powder was separately incorporated into each recycled fired-clay brick waste that had been sieved at 125 μm. The strength values of the reference geopolymers made from un-burnt and burnt recycled fired clay brick waste without silica sand addition are 40.96 MPa and 53.16 MPa, respectively. Geopolymers from un-burnt and burnt recycled fired clay brick wastes have compressive strengths of between 40.29 and 50.88 MPa and between 45.75 and 64.89 MPa, respectively, when silica sand powders with the particle sizes are increased from 45 to 125 μm. Geopolymers from un-burnt and burnt recycled fired clay brick wastes achieve their maximum compressive strengths when the silica sand powder added is sieved at 125 μm. Pore structure examination reveals that all geopolymers have mesopores and macropores in their structure. The compressive strength and pore structure of geopolymers were found to be affected by silica sand with different particle sizes that is added to recycled-fired clay brick wastes that have been sieved at 125 μm.