The use of alternative fuels contributes to the lowering of the carbon footprint of the internal combustion engine. Biofuels are the most important kinds of alternative fuels. Currently, thanks to the new manufacturing processes of biofuels, there is potential to decrease greenhouse gas (GHG) emissions, compared to fossil fuels, on a well-to-wheel basis. Amongst the most prominent alternative fuels to be used in mixtures/blends with fossil fuels in internal combustion (IC) engines are biodiesel, bioethanol, and biomethanol. With this perspective, considerable attention has been given to biodiesel and petroleum diesel fuel blends in compression ignition (CI) engines. Many studies have been conducted to assess the impacts of biodiesel use on engine operation. The addition of alcohols such as methanol and ethanol is also practised in biodiesel–diesel blends, due to their miscibility with the pure biodiesel. Alcohols improve the physico-chemical properties of biodiesel–diesel blends, which lead to improved CI engine operation. This review paper discusses some results of recent studies on biodiesel, bioethanol, and biomethanol production, their physicochemical properties, and also, on the influence of the use of diesel–biodiesel–alcohols blends in CI engines: combustion characteristics, performance, and emissions.

The use of biodiesel fuel in compression ignition engines has the potential to reduce CO₂, which can lead to a reduction in global warming and environmental hazards. Biodiesel is an attractive fuel, as it is made from renewable resources. Many studies have been conducted to assess the impact of biodiesel use on engine performances. Most of them were carried out in positive temperature conditions. A major drawback associated with the use of biodiesel, however, is its poor cold flow properties, which have a direct influence on the cold starting performance of the engine. Since diesel engine behavior at negative temperatures is an important quality criterion of the engine’s operation, one goal of this paper is to assess the starting performance at −20 °C of a common automotive compression ignition engine, fueled with different blends of fossil diesel fuel and biodiesel. Results showed that increasing the biodiesel blend ratio generated a great deterioration in engine startability. Another goal of this study was to determine the biodiesel blend ratio limit at which the engine would not start at −20 °C and, subsequently, to investigate the impact of Di-Ethyl-Ether (DEE) injection into the intake duct on the engine’s startability, which was found to be recovered.

Reducing fuel consumption is a prime objective in the automotive industry in order to meet regulatory and customer demands. Variable valve actuation offers many opportunities for improving the spark ignition engine’s performance in areas such as fuel economy and pollutant emissions. Our studies revealed that the ability to control maximum intake valve lift does indeed offer the ability to control intake air mass, but also has the added benefit that it improves the fuel-air mixing process thanks to an increased turbulence, caused by the increased intake flow velocity. This is particularly important at idle and low part loads when low maximum lifts are to be used for improving the fuel economy or for achieving the required power. The paper focuses on the experimental results obtained when approaching idle operation with different intake valve laws. Results indicating the potential of using low intake valve lift for fuel economy and cyclic dispersion improvement are presented in this paper.

Increasing energy performance of internal combustion engines is largely influenced by frictional forces that arise between moving parts. Thus, in this respect, the nature and quality of the engine oil used is an important factor. Equally important is the effect of various engine injection strategies upon the oil quality. In other words, it's of utmost importance to maintain the quality of engine oil during engine's operation. Oil dilution is one of the most common causes that lead to its wear, creating lubrication problems. Moreover, at low temperatures operating conditions, the oil dilution with diesel fuel produces wax. When starting the engine, this may lead to lubrication deficiencies and even oil starvation with negative consequences on the engine mechanism parts wear (piston, rings and cylinders) but also crankcase bearings wear.Engine oil dilution with diesel fuel have several causes: wear of rings and/or injectors, late post-injection strategy for the sake of particulate filter regeneration, etc.This paper presents a study on the degree of deterioration of engine oils as a result of dilution with diesel fuel. The analysed oils used for this study were taken from various models of engines equipped with diesel particulate filter. The assessment is based on the determination of oil flash point and dilution degree using the apparatus Eraflash produced by Eralytics, Austria. Eraflash measurement is directly under the latest and safest standards ASTM D6450 & D7094), which are in excellent correlation with ASTM D93 Pensky - Martens ASTM D56 TAG methods; it uses the Continuous Closed Cup method for finding the Flash Point (CCCFP).

Increased environmental awareness and depletion of fossil petroleum resources are driving the automotive industry to seek out and use alternative fuels. For instance, the biofuel is a major renewable energy source to supplement declining fossil fuel resources. The addition of alcohols like methanol and ethanol is practical in biodiesel blends due to its miscibility with the pure biodiesel. Alcohols also improve physico-chemical properties of biodiesel blends, which lead to improved combustion efficiency. Proper volatility of fuels is critical to the operation of internal combustion engines with respect to both performance and emissions. Volatility may be characterised by various measurements, the most common of which are vapour pressure, distillation and the vapour/liquid ratio. The presence of ethanol or other oxygenates may affect these properties and, as a result, performance and emissions, as well. However, in the case of diesel-biodiesel-alcohols mixtures, the variance of component volatility makes difficult the analysis of the overall volatility. Thus, the paper presents an experimental method of distilling diesel-biodiesel-alcohols mixtures by adjusting the boiler pressure of an i-Fischer Dist equipment.

Out of the alternative fuels for spark ignition (SI) engines, natural gas (NG) is one of the best substitutes for gasoline. To show the full ecologic potential of NG, based on a current turbocharged diesel engine, a so-called “monovalent” SI engine was developed at the University of Pitești. In other words, to properly make use of the NG high-octane number, the prototype engine features an 18.25 compression ratio. Therefore, the compromise usually made to allow the SI engine to run in bi-fuel mode (either fueled with gasoline or with NG) is not present in this case. This being the context, the paper presents experimental results obtained at the engine test bench when using NG. As it is a highly compressed SI engine, gasoline could not be used because of the knocking issues. So, to be able to perform a comparison of the NG effects, liquified petroleum gas (LPG) was also used. The operating point used is 2000 rpm and 2 bar of BMEP. Since during engine testing, the exhaust gas analysis was not available, to obtain information about the chemical species that resulted while burning NG and LPG, a 1D model was developed in AVL Boost, which was calibrated and validated based on the available experimental data issued from the test bed. Thus, this paper presents an analysis of the engine-out emissions while using NG and LPG, showing a significant decrease in NO_x and HC for the NG case.