Dredged soils have been used as construction materials by alkaline activation with steel slag (steel slag-dredged soil mixtures) at harbors. Such mixtures develop strength chiefly by calcium silicate hydrate (C-S-H) formation by the pozzolanic reaction. However, the strength of such mixtures is unpredictable, and in some cases, mixtures have been too soft for the intended engineering application. An identification of strength development indicators would accelerate evaluation processes for strength development to facilitate and promote the utilization of such materials. This paper focuses on the relationship between the characteristics of soil organic matters in dredged soils and the strength development of the mixtures by a comparison of eight dredged soils collected from eight different Japanese harbors. The characteristics of the soil organic matters were identified to determine as indicators of mixtures with weak strength development, i.e., enriched sulfur content in extracted soil organic matter (humic acid) fraction, and the N/C ratio of humic acid similar to land humic acid standards. Increases in the validated fraction of dredged soils and steel slag by replacing fractions disadvantageous to construction resources would contribute to reduce waste production, which would lower the environmental impact of the use, aiming to achieve sustainable utilization of such materials.

Previous studies of cadmium and mercury immobilization in geopolymers have produced inconsistent results due to their different pozzolans, metal concentrations, and mixing procedures. Understanding the effects of these parameters on heavy metal immobilization is key to predicting their long-term stability. In this study, cadmium and mercury were incorporated into a metakaolin-based K-activated geopolymer by three mixing procedures and concentrations of 0.02–1.00 wt.%. The samples were then immersed in water for 90 d to determine their stability. The results show that mercury is readily leached from the geopolymer, but cadmium is retained. Adding the heavy metals in salt form converts the metals into cadmium hydroxide and mercury oxide that reside at the bottom of the geopolymer. Mixing the salts with water forms soluble heavy metals prior to geopolymerization. This procedure produces more-homogeneous geopolymers. Cadmium is associated with silicate and aluminate, giving a better stability, whereas mercury forms mercury oxide. Different cadmium and mercury concentrations do not change the metal speciation as mercury is affected by relativistic contribution.

In radioactive waste disposal facilities, low-permeability engineered barrier materials are important for inhibiting radionuclide migration. However, dissolution–precipitation reactions under alkaline conditions change the permeability of engineered barriers. To understand long-term dissolution–precipitation reactions under alkaline conditions in chemically complex systems, trenches and drill holes were excavated at Narra in Palawan, where alkaline fluids (pH > 11) have been naturally produced, seeping into clastic sediments derived from serpentinized ultramafic rocks and gabbro of Palawan ophiolite. Interaction between the alkaline seepage and clastic sediments, which have been deposited since 15,000 radiocarbon years before present (¹⁴C yr BP), led to dissolution of minerals and the precipitation of Si-bearing phases which were divided into two main categories: Fe-Mg-Si infillings and Ca-Si infillings. The former category was composed of iron-magnesium-silicate-hydrate (F-M-S-H) and a nontronite-like mineral and was widely recognized in the clastic sediments. The nontronite-like mineral likely formed by interaction between silicates and alkaline seepage mixed with infiltrated seawater, whereas F-M-S-H formed by the reaction of silicates with alkaline seepage in the absence of seawater infiltration. Ca-Si infillings included 14 Å tobermorite and were precipitated from alkaline seepage combined with the Ca and Si supplied by the dissolution of calcite and silicates in the clastic sediments.

Silicate glasses are durable materials in our daily life, but corrosion rate accelerates under alkaline aqueous environment. Such situation has raised concerns, for example, in nuclear waste disposal where vitrified wastes encounter to alkaline leachate from surrounding concrete materials. Here we report volcanic glass example surviving with a hyperalkaline groundwater (pH > 11) and high flow rate for about 4000 years. The tiny glass fragments were extracted from the volcanic ash layer sandwiched between ultramafic sediments using microanalytical techniques. Sharp elemental distributions at the glass surface, where amorphous-like smectite precursors and crystalline smectites coexist, suggest the corrosion by an interface-coupled dissolution–precipitation mechanism rather than inter-diffusion. The corrosion rate was maintained at, the minimum, 2.5 orders of magnitude less than the rate observed for fresh glass, even in the presence of Fe and Mg that might have consumed Si through the silicate precipitation.

Silicate glasses are durable materials in our daily life, but corrosion rate accelerates under alkaline aqueous environment. Such situation has raised concerns, for example, in nuclear waste disposal where vitrified wastes encounter to alkaline leachate from surrounding concrete materials. Here we report volcanic glass example surviving with a hyperalkaline groundwater (pH > 11) and high flow rate for about 4000 years. The tiny glass fragments were extracted from the volcanic ash layer sandwiched between ultramafic sediments using microanalytical techniques. Sharp elemental distributions at the glass surface, where amorphous-like smectite precursors and crystalline smectites coexist, suggest the corrosion by an interface-coupled dissolution-precipitation mechanism rather than inter-diffusion. The secondary minerals acted as a protective film for the glass by limiting water accessibility. The corrosion rate was maintained at, the minimum, 2.5 orders of magnitude less than the rate observed for fresh glass, even in the presence of Fe and Mg that might have consumed Si through the silicate precipitation.