Zhiqiang Zheng

Dr. Zhiqiang Zheng

orcid

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 August 2020 in BMC Oral Health
Verified
Journal Article
Open access
PDF file
JLJie Lin
Jie Lin
ZLZhenxiang Lin
Zhenxiang Lin
ZZZhiqiang Zheng
Zhiqiang Zheng
Background: The purposes of this simulation study were to evaluate the stresses in the roots of endodontically treated molars with extensive coronal tissue loss which were restored by endocrowns (all-in-one core and crown) and traditional crowns with post-cores, during masticatory simulation using finite element analysis. Methods: A mesio-distal cross-section of a lower right first molar was digitized and used to create 2-dimensional models of the teeth and supporting tissue; different crown designs, viz., endocrown with 2 mm occlusal clearance, endocrown with 4 mm occlusal clearance and post-core crown; different crown materials, viz., zirconia (Zr) and lithia-disilicate reinforced glass ceramic (LDRGC), and different post and core materials, viz., glass fiber (GF), stainless steel (SS) and metal cast (MC). An axial load of 600 N was applied to the central fossa of occlusal surface. Results: The stress distributions were similar between Zr and LDRGC for periodontal ligament and alveolar bone. The root canal inner wall maximum principal stresses of SS post (70.8 MPa) and MC post (71.4 MPa) were higher than that of GF post (36.0 MPa) and endocrown (2.4 MPa). Conclusion: The endocrowns reduced stress concentration for the root canal inner wall in comparison with the conventional post-core crown. Molars restored with endocrowns are less prone to root fracture than those with posts.

14 December 2017 in Odontology
Verified
Journal Article
Closed access
PDF file
JLJie Lin
Jie Lin
JMJukka Pekka Matinlinna
Jukka Pekka Matinlinna
ASAkikazu Shinya
Akikazu Shinya
MBMichael George Botelho
Michael George Botelho
ZZZhiqiang Zheng
Zhiqiang Zheng

9 September 2014 in Odontology
Verified
Journal Article
Closed access
PDF file
JLJie Lin
Jie Lin
ZZZhiqiang Zheng
Zhiqiang Zheng
Akikazu ShinyaAkikazu Shinya
Akikazu Shinya
JMJukka Matinlinna
Jukka Matinlinna
MBMichael George Botelho
Michael George Botelho
ASAkiyoshi Shinya
Akiyoshi Shinya

12 September 2022 in BMC Oral Health
Verified
Journal Article
Open access
PDF file
PCPingping Cai
Pingping Cai
YZYingying Zhuo
Yingying Zhuo
JLJie Lin
Jie Lin
ZZZhiqiang Zheng
Zhiqiang Zheng
Background: This research aimed to explore feasibility and the time required when erbium-doped yttrium aluminum garnet (Er:YAG) laser as a non-invasive treatment modality to retrieve different thicknesses of zirconia material bonded by two dental cements from titanium implant abutments. Methods: Prepared 80 titanium blocks (length: 20 mm, width: 10 mm, height: 10 mm) and square zirconia sheets (length: 10 mm) with different thicknesses (1 mm, 2 mm, 3 mm, and 4 mm) were 20 pieces each. Resin modified glass ionomer cement (RelyX Luting 2; RXL) and resin cement (Clearfil SA luting; CSL) were used to bond zirconia sheet and titanium block. Specimens were kept in 100% humidity for 48 h. Er:YAG laser was used to retrieve the zirconia sheet and recorded the time. Universal testing machine was used to measure the residual adhesion of the samples that did not retrieve after 5 min of laser irradiation. Shear bond strength (MPa) and the time data (s) were analyzed using Kruskal–Wallis Test. The bonding surface and the irradiation surface of the zirconia sheet was examined with the scanning electron microscopy (SEM). Results: Within 5 min of laser irradiation, RXL group: 1 mm group all fell off, 2 mm group had 3 specimens did not fall off, there was no statistical difference in the average time between the two groups; CSL group: half of the 1 mm group fell off. Shear bond strength test results: there was no statistical difference between 1 and 2 mm in RXL group and 1 mm in CSL group, there was no statistical difference between 3 mm in RXL group and 2 mm in CSL group, and there were significant differences statistically in comparison between any two groups in the rest. SEM inspection showed that the bonding surface and the irradiation surface of the zirconia sheet had changes. Conclusion: In this vitro study, the following could be concluded: it is faster to remove zirconia crowns with thickness less than 2 mm from titanium abutment when luted with RelyX Luting 2 compared to Clearfil SA luting.

21 June 2023 in BMC Oral Health
Verified
Journal Article
Open access
PDF file
JLJie Lin
Jie Lin
PCPingping Cai
Pingping Cai
YZYingying Zhuo
Yingying Zhuo
LLLing Lin
Ling Lin
ZZZhiqiang Zheng
Zhiqiang Zheng
Background: The purpose of this study is to investigate the performance and fracture resistance of different resin-matrix ceramic materials for use in implant-supported single crowns with respect to the abutment design (crown thickness: 1 mm, 2 and 3 mm). Methods: Forty-eight abutments and crowns were fabricated on implants in the right lower first molar. Two resin-matrix ceramic materials for dental crowns were selected for study: (1) a glass-ceramic in a resin interpenetrating matrix (Vita Enamic, Vita, Germany) and (2) a resin-based composite with nanoparticle ceramic filler (Lava Ultimate, 3 M ESPE, USA). Three types of abutments were designed: 1 mm thick crown + custom titanium abutment, 2 mm thick crown + custom titanium abutment and 3 mm thick crown + prefabricated titanium abutment. The experiment was divided into 6 groups (n = 8) according to the crown materials and abutment designs. After 10,000 thermocycles, fracture resistance was measured using a universal testing machine. The statistical significance of differences between various groups were analysed with ANOVA followed by a post hoc Tukey’s honestly significant difference test. The surfaces of the fractured specimens were examined with scanning electron microscopy (SEM). Results: Two-way ANOVA revealed that the abutment design (F = 28.44, P = 1.52 × 10− 8<0.001) and the crown materials (F = 4.37, P = 0.043 < 0.05) had a significant effect on the fracture resistance of implant crown restoration. The Lava Ultimate-2 mm group showed the highest fracture resistance of 2222.74 ± 320.36 N, and the Vita Enamic-3 mm group showed the lowest fracture resistance of 1204.96 ± 130.50 N. Most of the 1 and 2 mm groups had partial crown fractures that could be repaired directly with resin, while the 3 mm group had longitudinal fracture of the crown, and the crowns were detached from the abutments. Conclusion: Based on the in vitro data of this study, the fracture resistance of the 2 mm thick resin-matrix ceramic crown design was higher than that of the 1 and 3 mm groups. The 2 mm thick resin-matrix ceramic crown and personalized abutment are an option to replace zirconia for implant crown restoration.

6 April 2007 in Acta Crystallographica Section E Crystallographic Communications
Verified
Journal Article
Open access
PDF file
ZZZhiqiang Zheng
Zhiqiang Zheng
CLChong-Wu Liu
Chong-Wu Liu
BLBin Lin
Bin Lin
In the title compound, [Zn2(C5H6O4)(C2H3N4)2] n , one of the Zn atoms is four-coordinated by three N atoms from three 3-amino-1,2,4-triazolate ligands and one O atom from the glutarate ligand, while the other Zn atom is five-coordinated by three N atoms from three 3-amino-1,2,4-triazolate ligands and two O atoms from the glutarate ligand. The binuclear unit inter-acts through glutarate and 3-amino-1,2,4-triazolate ligands, leading to a polymeric three-dimensional structure. © 2007 International Union of Crystallography. All rights reserved.link_to_subscribed_fulltex