X‐ray computed tomography (CT) has become a critical technique in the study of porous media. It has attracted growing attention for analyzing hydrate‐bearing sediment, but this has been done using surrogates (Xe/Kr) only due to difficulties in distinguishing methane hydrate from water. This study presents the successful imaging of methane hydrate coexisting with pore liquid, gas, and sediments. We used potassium iodide (KI) solutions and in‐line propagation‐based phase‐contrast CT analysis of X‐ray attenuation and diffraction to distinguish the four materials. Thus, consideration for CT‐related X‐ray physics was necessary to optimize KI concentrations, improve material separation with X‐ray propagation, and properly interpret artifacts within the images. The images clearly show methane hydrate in the pore space of sand (~250 μm) coexisting with KI solution and gas. Following this, X‐ray CT can now be used to visualize pore habits of natural methane hydrate in sediment cores.
Mechanical behavior of hydrate‐bearing sediments is critical for well stability, reservoir deformation, and sea floor settlement during gas production. Current understanding on the mechanism of hydrate strengthening hosting sediments relies on conceptual models based on idealistic pore‐scale assumptions. Yet pore‐scale study is rare and limited to hydrate‐bearing sediments formed with surrogate guest molecules rather than methane. We present for the first time pore‐scale triaxial test results of methane hydrate‐bearing sediments. Besides the traditional stress‐strain relationship, we further explored (1) sand particle crushing and (2) pressure‐temperature dependent strength variations and (3) creep of hydrate‐bearing sediments. Results show that as hydrate enables the sand skeleton to bear additional loads, the potential of sand crushing upon hydrate dissociation also increases. Strength of hydrate‐bearing sediments decreases as pressure‐temperature condition approaches hydrate phase boundary. Hydrate‐bearing sediments creep and heal with time. The new observations suggest additional complications to be considered during gas production.
3 October 2014 in Journal of Chemical & Engineering Data
Physical properties of hydrate‐bearing sediments are often correlated with hydrate saturation with little or no information on hydrate distribution uniformity in the specimens. This study focuses on water redistribution and sediment skeleton shift depending on various hydrate formation conditions in unsaturated systems, as well as on the resulting hydrate distribution patterns. Using X‐ray computed tomography, we investigate the factors such as fines content and the pressure‐temperature path on mass migration during carbon dioxide hydrate formation. The experiments show water migration, preferential hydrate formation toward the core periphery, localized patchy hydrate distribution, and sediment particle movement toward the core center. Sediment particle movement can be impeded in densely packed specimens. The overall mass migration due to hydrate formation can be significantly suppressed by adding 5% by mass of kaolinite. Hydrate formation initiated by pressurization and then cooling causes less mass migration than the cases where hydrate is formed using cooling followed by pressurization or pressurizing frozen cores followed by heating methods. Freezing can induce water migration and particle pushing in a similar manner as hydrate formation. Image analyses show that the pressure‐temperature path and the rates of heat transfer during hydrate nucleation and growth govern the uniformity of hydrate distribution in sediments.