There is currently an intensive development of sugar-based building blocks toward the production of renewable high-performance plastics. In this context, we report on the synthesis of a rigid diol with a spirocyclic structure via a one-step acid-catalyzed acetalation of fructose-sourced 5-hydroxymethylfurfural and pentaerythritol. Preliminary life cycle assessment (LCA) indicated that the spiro-diol produced 46% less CO2 emission than bio-based 1,3-propanediol. Polymerizations of the spiro-diol together with another sugar-based flexible 1,6-hexanediol for the production of polyesters and poly(urethane-urea)s were investigated, and reasonably high molecular weights were achieved when up to 20 and 60 mol% spiro-diol was used for polyesters and poly(urethane-urea)s, respectively. The glass transition temperatures (Tgs) of the polyesters and poly(urethane-urea)s significantly increased upon the incorporation of the rigid spirocyclic structure. On the other hand, it was observed that the spiro-diol was heat-sensitive, which could cause coloration and partial crosslinking when >10% (with respect to dicarboxylate) was used for the polyester synthesis at high temperatures. The results indicated that the polymerization conditions have to be carefully controlled under these conditions. However, when the spiro-diol was used for the synthesis of polyurethanes at lower temperature, the side reactions were insignificant. This suggests that the new spiro-diol can be potentially suitable toward the production of sustainable rigid polyurethane materials like coatings or foams, as well as renewable polyesters after further optimization of the polymerization conditions.
9 May 2018 in Journal of Polymers and the Environment
This work presents a new polyester binder based on 2,5-furandicarboxylic acid (FDCA) as precursors of polyurethane (PU) coatings. The new 100% bio-based structure is composed of four different monomers such as glycerine (Gly), 1,3-propanediol (1,3-PD), 2,5-furandicarboxylic acid (FDCA) and succinic acid (SA). The corresponding PU coating was obtained by crosslinking with a conventional polyisocyanate (Vestanat 1890/100). Evaluation of technological performances is present and benchmarked against partially bio-based (75% renewable carbon) polyester binder and fossil-based polyester binder, already developed in one of our previous work. The study showed a stiffer PU coating and a more hydrophilic character leading to better adhesion where a possible potential application may be interesting as an intermediate layer/primer in the field of metal coating (coil coating, automotive). Afterwards, the evaluation of the total impact of greenhouse gas emissions (GHG), the total non-renewable energy use (NREU) by the Life Cycle Assessment (LCA) for the new polyester binder are included on a cradle-to-gate approach, and considering an FDCA production process starting from sugar beet (primary data). The results showed a very noteworthy reduction in terms of GHG emissions (− 36 and − 79%) and a noticeable reduction impact in terms of NREU (− 38 and − 60%) compared to 75% bio-based and fossil-based polyester binders respectively. Moreover, a sensitivity analysis regarding sugar production from beet cultivation was developed through different LCA calculation methodologies. Those methodologies showed a not very significant difference between them.