A frequency-reconfigurable slot-ring antenna switching between ${\boldsymbol L}$ and ${\boldsymbol C}$ bands is presented. The aperture of an ${\boldsymbol L}$-band slot-ring antenna can be reconfigured to a 2×2 ${\boldsymbol C}$-band slot-ring antenna array by changing the states of 16 PIN diode switches. This antenna operates at 1.76/5.71 GHz with a fractional bandwidth (FBW) of 8.6%/11.5%, in the ${\boldsymbol L}$-/${\boldsymbol C}$-band operating states, respectively. The measured realized gain and radiation efficiency are 0.1/4.2 dBi and 66.6%/80.7%, respectively. The antenna element spacing at 5.71 GHz is 0.36$\lambda_{0}$ which enables beamsteering without grating lobes. This shared-aperture antenna is scalable to a larger array with element spacing of less than half wavelength in both frequency bands.
30 January 2018 in IEEE Antennas and Wireless Propagation Letters
A third-order SIW integrated filter/antenna is presented in this letter. The filter/antenna is composed of two cavity resonators with a slot antenna in the second cavity. The slot antenna excites two modes in the slot cavity, creating a third-order filtering response while preserving the radiating characteristics. A transmission zero can be arbitrarily placed below or above the passband. The filter/antenna operates at a center frequency of 3.71 GHz and has an 8.29% fractional bandwidth with a 5.10 dBi antenna gain.
17 May 2018 in IEEE Transactions on Microwave Theory and Techniques
Directly coupling antennas to filters can remove the transition loss between the two and reduce the size of radio frequency front ends. Circularly polarized (CP) patch antennas with a single feed are very popular in many applications due to their compact size and ease of design. However, a probe-fed CP patch antenna typically exhibits only 1%-2% useful fractional bandwidth by considering both impedance matching and axial-ratio (AR) bandwidths. Thick substrates were used to realize single-feed CP antennas with wider bandwidth. However, thick substrates may cause issues, such as surface wave excitation, mutual coupling, and low efficiency. In this paper, we present a new approach to enhance the impedance-AR bandwidth of probe-fed CP patch antennas without using thick substrates. By integrating CP patch antennas with cavity filters and sequentially rotating the CP filter/patch antenna elements to form a 2 x 2 array, an impedance-AR bandwidth of 8.3% is achieved with the thickness of the antenna layer to be 0.0292λ₀. In addition, a third-order Chebyshev filtering function is embedded in this antenna array to enhance the out-of-band interference rejection.
28 April 2020 in IEEE Transactions on Antennas and Propagation
In this article, a 7×7 reconfigurable reflectarray operating at X- band is proposed and experimentally verified. The reflectarray consists of linearly polarized, dual-resonance, tunable unit cells fabricated on a single layer. Reconfigurability is achieved by loading each dual-resonance unit cell with four varactors; the two resonances provide a phase range greater than 360°. The unit cell design utilized in this reflectarray is analyzed using full-wave Floquet simulations. A biasing network supporting individual biasing of each array element is designed, allowing beamsteering in E-, H-, and diagonal planes. The proposed reflectarray is evaluated using both full-wave simulations and measurements. To facilitate measurements, a fused filament deposition 3-D printer is used to fabricate an antenna mounting fixture using micrometer stages to make fine adjustments for the final alignment. A measured gain of 15.03 dBi, 3 dB gain fractional bandwidth of 7.81%, and continuous beam scanning are demonstrated in multiple planes from -50° to +50° at 10.1 GHz.
3 August 2018 in IEEE Transactions on Antennas and Propagation
A reconfigurable dual-polarized slot-ring antenna/array, switching between S- and C-band with wide bandwidth in each operating state is presented. By simultaneously switching eight p-i-n diode switches, a $2 \times 2$ C-band antenna array can be reconfigured to an S-band antenna unit cell, and vice versa. Fractal shapes are incorporated into the antenna structure to significantly enhance bandwidth. In the S-/C-band operating state, this antenna shows 69.1%/58.3% fractional bandwidth with a measured maximum realized gain of 2.4/3.1 dBi. For the $2 \times 2$ C-band array, the spacing between the elements is less than $0.5\lambda _{{0}}$ over the frequency band which enables grating-lobe-free beam scanning. A unidirectional version of this antenna/array with more than 12/16 dB front-to-back ratio at 3.5/8 GHz is also demonstrated. This wideband antenna/array can be used as a unit cell of a larger array with element spacing of half wavelength at the center frequency of both frequency bands.
4 September 2019 in IEEE Transactions on Microwave Theory and Techniques
In this article, tunable integrated filter/antennas are demonstrated with two coupling configurations that provide design control of the bandwidth performance over the tuning range. The first is a single-layer third-order tunable filter/antenna with an increasing fractional bandwidth (FBW). The measured device has a frequency tuning range from 1.62 to 2.08 GHz, an FBW increasing from 3.0% to 4.8%, and a gain increasing from -7.3 to 3.6 dBi. The second is a double-layer vertically integrated third-order tunable filter/antenna that provides a constant absolute bandwidth over the tuning range. This design accounts for the frequency-dependent behavior of the antenna radiation Q. The constant absolute bandwidth device is tunable from 1.65 to 1.90 GHz, has a maximum bandwidth variation of 45.3 ±7.4 MHz over the tuning range, and exhibits a gain from -6.1 to 4.3 dBi.