Objectives: This study aimed to estimate the transmission parameters, effective reproduction number, epidemic peak, and future exposure of coronavirus disease 2019 (COVID-19) in South Asian countries.Methods: A susceptible-exposed-infected-recovered-death (SEIRD) model programmed with MATLAB was developed for this purpose. Data were collected (till June 28, 2021) from the official webpage of World Health Organization, along with the Center for Systems Science and Engineering at Johns Hopkins University. The model was simulated to measure the primary transmission parameters. The reproduction number was measured using the next-generating matrix method.Results: The primary transmission rate followed an exponential Gaussian process regression. India showed the highest transmission rate (0.037) and Bhutan the lowest (0.023). The simulated epidemic peaks matched the reported peaks, thereby validating the SEIRD model. The simulation was carried out up to December 31, 2020 using the reported data till June 9, 2020. Conclusion: The information gathered in this research will be helpful for authorities to prevent the transmission of COVID-19 in the subsequent wave or in the future.
In thermal ablation, several techniques of treating infected cell in human tissue are being used by the physicians. Transferring heat to the infected cell is one of them. The purpose of this research is to investigate the tissue-temperature controlled system in thermal ablation and compare with two different point heating processes, namely constant and step heating. For this purpose, the finite element model of Penne's bio-heat equation has been developed to measure the temperature within the two-dimensional tissue model embedded with a small tumor. The tissue temperature-controlled heating was designed to restrict the healthy tissue temperature below the damage threshold temperature. Using the temperature profile, tissue damage index was measured with the help of Arrhenius rate equation. The results show that the tissue temperature-controlled system reduces the temperature of healthy tissue nearby the infected cell to 40% compare to constant and step point heating. This system keeps the healthy tissue within the threshold value (43 degrees C) up to 1000s when it is 100s for other two techniques. After 200s, healthy tissue nearby the infected cell start to damage for constant and step point heating. But temperature-controlled system always keep the healthy tissue safe. The results of this research conclude the temperature-controlled system a better heating technique to remove the infected cell. The information published in this paper will be helpful for the physicians and bio-medical engineers to treat the infected cell or to design medical equipment.
Traffic congestion is now a major issue in Bangladesh. According to the World Traffic Index 2025 Bangladesh has ranked 4th in the traffic index among 246 countries in the world. Traffic congestion at manual-signalized intersections in big cities has increased due to the narrow width of the roads. Our study focuses on reducing waiting time of vehicles in intersection by maintaining lanes. The Lama Bazar 4-ways junction in Sylhet city, a congested traffic junction is considered for our study. Through field observation, primary data of various vehicle kinds and their interarrival times has been gathered. Simulation model that replicates the current traffic situation was developed, and the suggested modifications were tested in Arena simulation software. The existing system, with a single lane for all movements, led to significant congestion and long waiting time. Vehicle waiting in traffic signal experiences increased waiting time. The proposed model introduced dedicated turning lanes for left-turning, right-turning, and straight-moving vehicles. The simulation result has shown that introducing dedicated turning lanes for left-turning, right-turning, and straight-moving vehicles significantly reduces idle time for vehicles at Lama Bazar 4-ways junction. Overall road segments, the waiting time has been lowered by 13% to 19%. The traffic congestion and dedicated turning lane can be maintained by increasing the effective width of the roads. The findings show that dedicated turning lanes greatly enhance traffic flow.
When analyzing real systems, collecting field data can be difficult. Therefore, many methods have been developed to generate artificial random numbers. One of the fundamental methods is the Linear Congruential Generation (LCG) method. It can generate random numbers based on the values of its parameters. The aim of this paper is to identify the key parameter that has the highest impact on the performance of the LCG method, particularly in terms of the random number repetition period. To do this, the Design of Experiment (DOE) technique was used, and a model was developed using Minitab software. The experiment was conducted five times, and the average was taken for better results. The Python code of the LCG method was used to determine the random number repetition period. According to the results of the study, it was found that the parameter
Many critical healthcare decisions are challenged by the inability to measure key underlying parameters. Glaucoma, a leading cause of irreversible blindness driven by elevated intraocular pressure (IOP), provides a stark example. The primary determinant of IOP, a tissue property called trabecular meshwork permeability, cannot be measured in vivo, forcing clinicians to depend on indirect surrogates. This clinical challenge is compounded by a broader computational one: developing predictive models for such ill-posed inverse problems is hindered by a lack of ground-truth data and prohibitive cost of large-scale, high-fidelity simulations. We address both challenges with an end-to-end framework to noninvasively estimate unmeasurable variables from sparse, routine data. Our approach combines a multi-stage artificial intelligence architecture to functionally separate the problem; a novel data generation strategy we term PCDS that obviates the need for hundreds of thousands of costly simulations, reducing the effective computational time from years to hours; and a Bayesian engine to quantify predictive uncertainty. Our framework deconstructs a single IOP measurement into its fundamental components from routine inputs only, yielding estimates for the unmeasurable tissue permeability and a patient's outflow facility. Our noninvasively estimated outflow facility achieved excellent agreement with state-of-the-art tonography with precision comparable to direct physical instruments. Furthermore, the newly derived permeability biomarker demonstrates high accuracy in stratifying clinical cohorts by disease risk, highlighting its diagnostic potential. More broadly, our framework establishes a generalizable blueprint for solving similar inverse problems in other data-scarce, computationally-intensive domains.
11 November 2025 in SciEn Conference Series: Engineering
Fat in human abdomen plays an adverse role in the metabolic and cardiovascular medical problems. Heat transfer knowledge through the human tissue in particular abdominal tissue can indicate the amount of fat layers. Experimental measurement of abdominal layer temperatures is invasive, complex, and costly. Thus, a computational model is essential to non-invasively simulate temperature variations, simplifying research, reducing costs, and enabling efficient analysis of temperature distribution. This study focuses on developing a 3-D bio-heat transfer model for the human abdomen and validating it using experimental data and results from commercial software. The model consists of five layers of different thickness. The finite element method adopted in the ADVENTURE_Thermal was used to solve the bio-heat equation. Two abdomen models: slim and obese were compared to normal environmental conditions. The present computational model was validated with experimental results and commercial software COMSOL Multiphysics. Body core temperature is found same, but skin temperature is found different for models. The obese abdomen was found to have a lower skin temperature than that of slim abdomen. The low skin temperature indicates the presence of more fat in the abdomen. This variation emphasizes the influence of fat layer thickness on heat transfer and thermoregulation, showcasing the model's effectiveness in accurately simulating bio-heat transfer. The validated model serves as a dependable tool for future research and practical applications, such as the non-invasive evaluation of obesity-related health risks.