This study formulated an iterative learning-based predictive control strategy for asynchronous switching of multiphase batch processes with complex characteristics in the framework of a two-dimensional (2-D) system. First, we constructed a Fornasini–Marchesini comprehensive feedback error model, considering the state deviation and output error. Using this model, we developed a switching model considering the match and mismatch cases. Furthermore, an iterative learning-based predictive control mechanism was designed for asynchronous switching with a greater freedom of adjustment and fast learning ability in the batch direction. Second, the asymptotic and exponential stability were discussed based on the related methods and theories, and the system stability conditions were expressed in the form of linear matrix inequality (LMI). Following an online mechanism to determine the LMI conditions, we derived the real-time optimal gains of the control law, the maximum dwell period (Max-DT) for the mismatch case, and the minimum dwell period for the match case. The switching signal was transmitted in advance according to the Max-DT to ensure the stability of the system during switching. Finally, the effectiveness of the proposed method was confirmed by utilizing the injection molding process.
For a class of the industrial cyber-physical system, i.e., multi-phase batch processes with small time-delays and asynchronous switching, this study develops a two-dimensional iterative learning hybrid robust predictive control method. Compared with the previous Lyapunov-Krasovsky function-based method, stability conditions given by the Lyapunov-Razumikhin function-based method is less conservative intensive in dealing with small time-delays. Not only that, compared to the traditional iterative learning method, the rolling-optimized gains of the control law make it possible for the designed controller to have fewer learning cycles, and the control performance is even better. Meanwhile, the minimum and the maximum dwelling times are obtained in conjunction with the exponential stability analysis of the system. Since the obtained dwelling times, an advanced switching signal is provided to avoid asynchronous switching situations. The simulation results for the injection molding process are finally utilized to illustrate the effectiveness and feasibility of the developed approach.