In this review, we discuss the merits of solution-processed metal oxide semiconductors and consider their application in thin-film transistors for large-area electronics.
This study reports the development of copper(I) thiocyanate (CuSCN) hole‐transport layers (HTLs) processed from aqueous ammonia as a novel alternative to conventional n‐alkyl sulfide solvents. Wide bandgap (3.4–3.9 eV) and ultrathin (3–5 nm) layers of CuSCN are formed when the aqueous CuSCN–ammine complex solution is spin‐cast in air and annealed at 100 °C. X‐ray photoelectron spectroscopy confirms the high compositional purity of the formed CuSCN layers, while the high‐resolution valence band spectra agree with first‐principles calculations. Study of the hole‐transport properties using field‐effect transistor measurements reveals that the aqueous‐processed CuSCN layers exhibit a fivefold higher hole mobility than films processed from diethyl sulfide solutions with the maximum values approaching 0.1 cm2 V−1 s−1. A further interesting characteristic is the low surface roughness of the resulting CuSCN layers, which in the case of solar cells helps to planarize the indium tin oxide anode. Organic bulk heterojunction and planar organometal halide perovskite solar cells based on aqueous‐processed CuSCN HTLs yield power conversion efficiency of 10.7% and 17.5%, respectively. Importantly, aqueous‐processed CuSCN‐based cells consistently outperform devices based on poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate HTLs. This is the first report on CuSCN films and devices processed via an aqueous‐based synthetic route that is compatible with high‐throughput manufacturing and paves the way for further developments.
Copper thiocyanate (CuSCN) is introduced as a hole-injection/hole-transport layer (HIL/HTL) for solution-processed organic light-emitting diodes (OLEDs). The OLED devices reported here with CuSCN as HIL/HTL perform significantly better than equivalent devices fabricated with a PEDOT:PSS HIL/HTL, and solution-processed, phosphorescent, small-molecule, green OLEDs with maximum luminance ≥10 000 cd m-2, maximum luminous efficiency ≤50 cd A-1, and maximum luminous power efficiency ≤55 lm W-1 are demonstrated.
The optical, structural and charge transport properties of solution-processed films of copper(I) thiocyanate (CuSCN) are investigated in this work. As-processed CuSCN films of ∼20 nm in thickness are found to be nano-crystalline, highly transparent and exhibit intrinsic hole transporting characteristics with a maximum field-effect mobility in the range of 0.01–0.1 cm2 V−1 s−1.
The use of copper thiocyanate (CuSCN) as a universal solution‐processable and highly transparent hole‐transporting layer in organic bulk‐heterojunction photovoltaic cells is demonstrated. When CuSCN is employed as a replacement for the commonly used poly(3,4‐ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS), organic solar cells with maximum power conversion efficiency of 8%, are realized; this value is 1.27 times higher than that for optimized control cells based on PEDOT:PSS.