The nanoporous material mayenite was synthesized by two methods: solid-phase and self-propagating high-temperature (combusting) (SHS) syntheses. The structure of the materials was determined by the...
31 December 2007 in Journal of the European Ceramic Society
A phase transition in Ca12Al14O33 has been discovered and investigated by thermogravimetric analysis, differential scanning calorimetry, dilatometry, and high-temperature X-ray diffraction. The phase transition occurs at 922 ± 45 K (ΔH = −406 ± 13 kJ/mol, ΔS = −440 ± 14 J/(mol K)) and is presumably a first-order one. It does not change the symmetry of the cationic subsystem. The phase transition is difficult to reveal because the material changes its mass, probably by releasing water bound in several different ways.
1 November 2010 in Journal of Nanoscience and Nanotechnology
Conductivity of yttria stabilized zirconia produced from weakly agglomerated nanopowder was investigated by ac impedance spectroscopy. Dense ceramic samples with the grain size from 90 to 800 nm were prepared at the variation of both pressing and sintering conditions. It was found that the bulk conductivity is not affected by grain size, while grain boundary conductivity is dependent on this factor. Observed grain boundary resistance increases with grain size. This relationship is contrary to the previous results obtained for the range from 1 to 18 m where grain boundary resistance decreased with grain size. Maximum of grain boundary resistance versus ceramics grain size is observed at 450 °C for the grain size about 270 nm.