This paper studies the interaction between water waves and a very large floating laminated disk in water of finite depth. The disk is a composite structure consisting of two surface sheets and a middle low-density elastic core layer. Based on the linear potential flow theory, an analytical solution of the hydroelastic problem is developed using the eigenfunction expansion method for the velocity potential of fluid motion. In the solution procedure, the laminated disk is regarded as double circular Euler sheets connected by a series of closely spaced and mutually independent vertical springs, and then an eighth-order differential equation of motion of the laminated disk is derived as the elastic boundary condition of the hydroelastic problem. An approximated model is then developed for the hydroelastic problem in shallow water. The deflection and bending moment of the disk and the free surface elevation near the disk are calculated, and it is found that the series solution for the velocity potential converges rapidly. Typical examples are presented to show the effects of different parameters, including wave frequency, the edge conditions of the disk, and the elastic coefficient of the core layer, on wave force, structural hydroelastic response, and wave field. Moreover, viscoelastic damping is introduced in the core layer, and its effect on the hydroelastic response is evaluated by adopting the complex stiffness method. The results indicate that the wave force on the laminated disk is larger than that on a corresponding rigid one over a very wide range of wave frequencies, and the local deformation of the lower sheet can be suppressed by designing a core layer with viscoelastic damping.
This paper studies wave scattering by multiple dual porous circular cylinders in front of a vertical wall. Each cylinder is composed of an outer partially perforated cylindrical shell and an inner impermeable column, and a circular wave-absorbing chamber is formed by the shell and column. An analytical solution to the hydrodynamic problem is developed in the context of potential flow theory. In the solving procedure, the hydrodynamic problem is transformed into an equivalent problem in an open water domain by using the image principle. The whole fluid domain in the equivalent problem is divided into multiple regions, and the velocity potential of the fluid motion in each region is expressed as the Fourier–Bessel series. The effect of the perforated shell on wave motion is considered through a pressure loss condition. The unknown coefficients in the velocity potential are determined by the transmission conditions on the boundaries between adjacent regions. The wave force, wave run-up on the porous cylinders, and the surface elevation near the cylinders are calculated. The analytical results are consistent with published results in several limiting cases. Typical cases are presented to clarify the characteristics of the wave force and wave run-up on the cylinders and discuss the effects of the wall and hydrodynamic interference on the hydrodynamic quantities. Moreover, several feasible applications of dual porous cylinders are discussed by visualizing the distribution of wave amplitude near the structures, and some valuable results are given.
It is desirable for naval architectures to simultaneously bear high force and dissipate dynamic energy. A structural protection approach via a specifically designed all-metal stiffened member with bistable components is proposed, which not only exhibits high stiffness but also an order of magnitude increase in the structural damping compared to that of a traditional member under wave impact. As a typical module, a two-degree-of-freedom model of the Euler beam stiffened by bistable component is derived and characterized as a double-well potential, and the theoretical analysis indicates that a unique combination of this coupled bistable-linear (CBL) module’s natural vibration and the bistable components’ higher frequency oscillation caused by the potential barrier highly enhances the structural damping. The CBL modules are utilized to stiffen a representative grille structure, which effectively mitigates the slamming response within the elastic range in FEM.
A floating viscoelastic composite structure with generalized elastic constraints, in which the material–structure-wave interaction induces energy dissipation, is analyzed with a novel cross-scale integrated hydro-viscoelastic model. A double-level three-dimensional (3D) representative volume element model coupling mesoscale reinforced particles to a macroscale composite structure is established to obtain the structure's viscoelastic dynamic equation. Therefore, a hydro-viscoelasticity analytical model for floating composite structures with arbitrary elastic constraints under wave action is developed in the context of potential flow theory. In the process of solving the velocity potential, the dispersion equation of the water covered by the composite structure is derived. The hydrodynamic and mechanical behaviors of the floating composite structure, including the reflection coefficient, transmission coefficient, dissipation coefficient, deflection, shear force, and bending moment, are comprehensively calculated, which depend on the cross-scale integrated effects of wave action, structural features, material characteristics, and constraint combinations. This material–structure-wave integrated model would be useful to elucidate the hydro-viscoelastic dissipation mechanism of marine structures.
19 April 2022 in Journal of Vibration Engineering & Technologies
In this work, we focus on assessing the group effect of localized corrosion on the ultimate strength of the marine structural plates and study the load-deformation behaviors of plates of various slenderness and uniaxial compression. Meanwhile, we investigate different corroded patterns from a single circular pit to 25 circular pits distributed over the plate and carry out hundreds of nonlinear finite element simulations by combining the number, depth, distribution of pits with imperfections and slenderness of plate. The distribution of multiple pits causes scattering of stress concentration on the plate, then the plastic section of plate changes with wider distribution of damage simultaneously. The ultimate strength arises when un-loading zone comprised of the yielding strips and holes extends across the plate. It can be concluded that the corroded condition defined as group effect of pits manipulates the deformation state and the loading capacity of plate at the ultimate strength mode that coincides with the proportion of effective loading area and section in the process of post-buckling. To validate the effect of pits group, we perform the numerical experiments of the post-buckling of steel plates containing pits in a row with different orientation.