As flexible and wearable electronics play more and more important role in smart watches, smart glass and virtual reality, and the power supply to the wearable electronics have been revealed more attentions for long-term usage and continuous healthy monitoring. To overcome the challenge, flexible self-powered BTO-PVDF/PDMS piezoelectric-triboelectric electric hybrid generators (BPP-HNG) are developed to human gesture monitoring and human machine interaction (HMI) application without external power supply. BPP-HNG based on BTO-PVDF and PDMS films are prepared by sol–gel and spin-coating method. When the BTO content is 20 wt.%, BPP-HNG exhibits better electrical performance with an output voltage of 20.51 V. A real-time gesture monitoring system is designed and developed to human machine interaction, which is able to control the motion of robot finger through BPP-HNG. BPP-HNG could monitor and recognize various gestures in real time, enabling synchronization between the human hand and the robot’s hand. With the convergence of AI technology and big data, BPP-HNG based HMI technology is expected to realize the potential of smarter and more intuitive interactions.
9 November 2017 in IEEE Transactions on Components, Packaging and Manufacturing Technology
With the rapid growth of the microelectronic packaging market, it is necessary to increase the throughput and reduce the cost of flip chip. Driven by these evolutions, a novel revolving-turret chip transferring (RTCT) technology is introduced to implement high-throughput flip chip packaging. The unnecessary time delays of packaging processes could be eliminated in the RTCT technology due to its parallel manner of motions. In order to analyze the packaging efficiency, the layout and movement sequence of the packaging system are studied, and a calculation model of packaging efficiency is proposed. Furthermore, the effects of the critical parameters (the horizontal and the vertical spacing of antennas and the maximum velocity and acceleration of the turret-type head) on packaging efficiency are investigated to search out the optimal parameters combination. To verify the performance of the RTCT technology under optimal parameters combination, two cases are implemented and compared. The results show that due to parallel motions of processes, unnecessary delays affecting the packaging efficiency have been reduced, and the packaging efficiency of ALN-9714 inlay could be more than 35k chips per hour. In addition, compared with the conventional flip chip packaging process, the RTCT technology is more effective in packaging the chips on antennas with multicolumn layout and small horizontal spacing.
The paper presents an analytic model of glass-interface-polyimide structure for predicting the blister formation during blister-actuated laser-induced forward transfer. In order to investigate the dynamic process of the heating and vaporizing of polymer in laser/matter interaction and crack propagation of glass/polymer interface in blister expansion, a discrete quasi-static analysis method is proposed. In the frame of fracture mechanics, the energy release rate is calculated and introduced to analyze interfacial crack propagation of glass/polymer interface. In additional, the blister expansion and formation are also computed based on a finite element model, and the analytical predictions are shown to be in good agreement with simulated results. The results show that blister height and crack length are sensitive to laser fluence. A higher laser fluence is much easier to induce higher blister height. The crack will propagate as the laser fluence is larger than the critical laser fluence.
In organic light-emitting diodes (OLEDs) manufacturing, inkjet printing has rapidly become popular due to its high resolution and low cost. However, the mechanism of droplet impacting on a rectangular pixel in OLEDs inkjet printing is not yet clear. In this paper, coalescence dynamics of droplet impacting on a rectangular pixel including the spread and retraction stages is simulated by the software of fluent. In addition, a dynamic model is proposed to analyze the spread and retraction behavior of droplet impacting on a rectangular pixel. In the spread stage, the dynamic equation of spread length with respect to time is derived based on energy and mass conservation. In the retraction stage, the variational principle instead of solving the complete Navier–Stokes equation is used to simplify the calculation. On this basis, the dynamic equation of retraction length with respect to time is achieved, and the theoretical solution is in agreement with the numerical result. Finally, the influences of droplet offset, size, and initial velocity on coalescence dynamics are analyzed. Furthermore, the dynamic model proposed in this paper provides a new possibility for the coalescence of a droplet impacting on a heteromorphic microcavity instead of a flat substrate.
17 September 2025 in ACS Applied Electronic Materials