This paper presents carbon nanotubes-containing polymer composites with layered gradient structure having electromagnetic interference (EMI) shielding properties. Polymer composite films were obtained on metal surface by aerosol deposition of a dispersion of carbon nanotubes in the solution of a copolymer of vinylidene fluoride with hexafluoropropylene (SCF-26) in acetone. Single-wall TUBALL (OCSiAl) carbon nanotubes were used. Three-layer coatings were formed with a concentration of nanotubes decreasing in each subsequent deposited layer. The reflection coefficient of electromagnetic radiation in the range of 20–35 GHz was measured. Gradient samples had significantly better characteristics compared to samples with uniform concentration of carbon nanotubes: the reflection coefficient reached −6dB at 35 GHz. The outer layer of gradient structure with 0.1 wt % CNT provides a better matching of the wave resistance with free space and a smooth entrance of an electromagnetic wave into the sample. The subsequent layers with an increasing concentration of single-walled carbon nanotubes (0.3 and 0.5%) absorb electromagnetic radiation. Polymer elastomer composite EMI shielding coatings with concentration gradient can be applied by aerosol deposition to the surfaces of any composition and shape. Our results could serve as a design tool in carbon nanotubes - based EMI shielding flexible polymer coatings.
This paper describes a structure and electrotransport properties of poly(ethylene terephthalate) track membrane (PET TM) modified by plasma of thiophene. It is shown that the deposition of the polymer on the track membrane surface by plasma polymerization of thiophene in case of forming a semipermeable layer results in creation of composite nanomembrane having in electrolyte solutions of asymmetry of conductivity - a rectification effect. It is caused by presence in the membrane of two layers with various functional groups, and also by changing of the pore geometry. Such type membranes can be used for creation of chemical and biochemical sensors.
A change in the contact properties of the surface of tetrafluoroethylene-vinylidene fluoride copolymer films by a dc discharge treatment has been studied, depending on the treatment time and the...
We studied the influence of electret charge on the hydrophilicity of polytetrafluoroethylene (PTFE) films treated by direct-current (DC) glow discharge. DC discharge treatment of polymers leads to significant hydrophilization and appearance of surface charges on initially hydrophobic polymer surfaces. It was shown that the storage of plasma-treated PTFE films in environments with different relative humidity leads to an increased water contact angle along with a decreased surface potential. The process of hydrophobic recovery of plasma-treated PTFE films is considered as a consequence of charge relaxation in a humid atmosphere. It was established that surface charging of plasma-treated polymers makes a significant contribution to their hydrophilicity. Было изучено влияние электретного заряда на гидрофильность пленок политетрафторэтилена (ПТФЭ), обработанных в тлеющем разряде постоянного тока. Обработка полимеров в разряде постоянного тока приводит к значительной гидрофилизации поверхности и появлению поверхностных зарядов на изначально гидрофобной поверхности полимеров. Было показано, что после плазменной обработки хранение пленок ПТФЭ на воздухе с различной относительной влажностью приводит к увеличению угла смачивания водой и одновременному снижению поверхностного потенциала. Процесс восстановления гидрофобности пленок ПТФЭ, обработанных плазмой, рассматривается как следствие релаксации заряда во влажной атмосфере. Было установлено, что зарядка поверхности в процессе плазменной обработки полимеров вносит существенный вклад в их гидрофильность.