The surface finish is an important characteristic in the incremental sheet forming (ISF) process and is often influenced by numerous factors within the forming process. Therefore, this research was aimed at identifying the optimal forming parameters through the Taguchi method to produce high-quality formed products. The forming tool radius, spindle speed, vertical step increment, and feed rate were chosen as forming parameters in the experimental design, with surface roughness as the response variable. Taguchi L16 orthogonal array design and analysis of variance (ANOVA) test were used to identify the parameter’s optimal settings and examine the statistically significant parameters on the response, respectively. Results confirmed that a significant reduction in surface roughness occurred with a drop in vertical step size and an increase in feed rate. In detail, the vertical step size has the most significant influence on the surface roughness, followed by the feed rate and the forming tool radius. In conclusion, the optimum level settings were obtained: forming tool radius at level 3, spindle speed at level 1, vertical step size at level 1, and feed rate at level 4. Additionally, confirmation experiment results based on the optimal settings indicated a good agreement against the experimental observation. Further, the response surface methodology (RSM) was also exploited to devise a mathematical model for predicting the surface roughness. The results comparison confirmed that both techniques could effectively improvise the surface finish.
26 April 2025 in Engineering Applications of Artificial Intelligence
Incremental sheet metal forming can manufacture various sheet metal products without a dedicated punch and die set. In this study, we developed a two-stage incremental forming process to decrease shape errors in the conventional incremental forming process. The forming process was classified into the first single point incremental forming (1st SPIF) process for forming a product and the counter single point incremental forming (counter SPIF) process to decrease shape error. The counter SPIF gives bending deformation in the opposite direction. Furthermore, the counter SPIF compensates for shape errors, such as section deflection, skirt spring-back, final forming height, and round. The tool path of the counter SPIF has been optimized through a relatively simple optimization method by modifying the tool path of the previous step. The tool path of the 1st SPIF depends on the geometry of the product. An experiment was performed to form a circular cup shape to verify the proposed tool path of the 1st and counter SPIF. The result confirmed that the shape error decreased when compared to the conventional SPIF. For the application, the ship-hull geometry was adopted. Experimental results demonstrated the feasibility of the two-stage incremental forming process.
This research aims to characterize damage at the sheared edge caused by the blanking operation of magnesium alloy AZ31B sheets. Shearing tests were carried out on an in-house blanking die-set and mechanical press (universal testing machine) by varying punch–die clearance and temperature. Edge damage was distinguished by the geometrical features of the sheared edge and by the distribution of the edge strain hardening (ESH) index. In this account, optical microscopy and scanning electron microscopy were applied to examine the characteristic dimensions of the sheared edge, fracture profile, and sheared edge quality, while the Vickers hardness test was applied to observe the surface micro-hardness in the shear zone (SZ) and the shear affected zone (SAZ). It was concluded that the blanking of magnesium alloy sheets at room temperature results in sheared edge defects, due to premature fracture, referred to here as micro-cracks, loose particles, and a jagged-plus-curved fracture profile. However, such deformities were completely suppressed with the rise in temperature. In addition, based on optical morphology, micro-hardness tests, and microstructure evolution, the recommendation regarding blanking temperature for the magnesium alloy AZ31B has was proposed.