José Manuel Damil Vicente

José Manuel Damil Vicente


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 July 2024 in U.Porto Journal of Engineering
Verified
Journal Article
Open access
PDF file
JVJosé Manuel Damil Vicente
José Manuel Damil Vicente
ARAgostinho Rocha
Agostinho Rocha
This paper presents a comprehensive comparative analysis of different multilevel converter topologies, including 2-level, Neutral Point-Clamped (NPC), Cascaded H-Bridge (CHB), and T-Type converters using the DQ current control strategy. The study aims to evaluate the performance of these topologies concerning current Total Harmonic Distortion (THD) and ripple in the direct and quadrature components of the current. A mathematical model of the grid is presented to facilitate the simulation study. The DQ current control scheme is implemented to regulate the current in both the direct and quadrature axes. The simulations are conducted under various operating conditions to capture the converters’ performance across different load scenarios and modulation techniques. Results indicate significant variations in the performance metrics among the different converter topologies. The 2-level converter exhibits higher THD and ripple compared to the more complex multilevel topologies.

5 June 2026 in IEEE Access
Verified
Journal Article
Open access
HSHesam Soroushzad
Hesam Soroushzad
JVJosé Manuel Damil Vicente
José Manuel Damil Vicente
ACAdriano Carvalho
Adriano Carvalho
ARAgostinho Rocha
Agostinho Rocha
The integration of heterogeneous energy sources in modern power systems requires multiport converters that balance structural simplicity with high operational flexibility. This paper proposes a novel bidirectional multiport DC-AC topology, termed X-Bridge, which employs a symmetric four-switch architecture to manage multiple independent power paths. Unlike conventional H-bridge configurations, the X-Bridge facilitates the seamless integration of heterogeneous sources without increasing the semiconductor count. Furthermore, a modified SPWM strategy is implemented that limits the switching and conduction intervals of each semiconductor to only 50% of the fundamental period. In contrast, conventional unipolar and bipolar methods require continuous device activity throughout the entire cycle. The performance of the proposed converter is validated through both PLECS simulations and a hardware prototype. Results confirm a robust dynamic response, maintaining a stable power output even under simultaneous source-voltage mismatch and abrupt load transients. The X-Bridge offers a reliable, fault-tolerant, and cost-effective solution for hybrid renewable energy and modular applications.

17 November 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
JVJosé Manuel Damil Vicente
José Manuel Damil Vicente
AFAHMAR FAROOQUE
AHMAR FAROOQUE
ARAgostinho Rocha
Agostinho Rocha
CRCarlos Ramos
Carlos Ramos
Gallium nitride (GaN) high-electron-mobility transistors enable power converters switching in the megahertz range, but their reliability is governed by mechanisms that differ from those of silicon carbide (SiC) MOSFETs. This review organises the evidence in a four-stage causal chain (stressor, mechanism, state change, failure mode), with indicators and mitigation treated as overlays. The chain separates reversible trap filling from irreversible defect generation, which alone accumulates over a service life. Applied to more than 200 sources, it yields four findings. First, dynamic on-state resistance, the most widely reported GaN-specific indicator, is not monotonic in stress, so monitoring requires at least two indicators of different provenance. Second, the lateral geometry moves the package failure site to the solder: wire-bonded lateral devices have survived several million power cycles, whereas chip-scale solder joints fail after hundreds to thousands of thermal cycles. Third, published lifetime projections for GaN converters range from tens to about 10¹⁰ years, depend strongly on the end-of-life criterion and have not been validated independently. Fourth, standards define how to measure dynamic on-state resistance but set no acceptance criterion. Finally, an experimental agenda pairs each open question with the experiment that would settle it and the outcome that present evidence predicts.