A sensing device composed of an eccentric core photonic quasi-crystal fiber based on surface plasmon resonance is designed using indium tin oxide (ITO) as the sensitive materials. The ITO film is deposited on the outside surface of the fiber to excite plasmonic interactions and facilitate refractive index (RI) detection. This eccentric core structure makes the evanescent field coupled effectively with analyte to achieve higher sensitivity. The influence of RI and structural parameters of different analytes on sensor performance was calculated by the finite-element method. In the analyte RI range between 1.33 and 1.39, the wavelength sensitivity reaches 21,100 nm/RIU, and the average sensitivity of 8750 nm/RIU is achieved at a resolution of . The sensor has large potential in the detection of unknown RI analytes in the near-infrared region.
A novel photonic crystal fiber (PCF) based on pure silica is designed to transmit 114 orbital angular momentum (OAM) modes in the wavelength range of 1.2 μm ~ 1.8 μm. The PCF composed of a central round air-hole, ring-shaped core, and air-hole array ensures effective refractive index differences of the constituent vector modes above 10-4 and stable transmission of the OAM modes. The finite element method (FEM) is implemented to analyze the PCF. The confinement losses and nonlinear coefficients of all the eigenmodes at 1,550 nm are less than 3.03×10-7 dB/m and 1.30 w−1∕km, respectively. In addition, the PCF shows higher effective refractive index difference, lower confinement loss, and nonlinear coefficient thus holding large promise in high-performance fiber communication systems.
High refractive index dielectric nanostructures represent a new frontier in nanophotonics, and the unique semiconductor characteristics of dielectric systems make it possible to enhance electric fields by exploiting this fundamental physical phenomenon. In this work, the scattered radiation spectral features and field-enhanced interactions of gallium phosphide disks with forked slits at anapole modes are investigated systematically by numerical and multipole decomposition analyses. Additional enhancement of the electric field is achieved by opening the forked slits to create high-intensity hot spots inside the disk, and nearby molecules can access these hot spots directly. The results reveal a novel approach for near-field engineering such as electric field localization, nonlinear optics, and optical detection.
A highly birefringent photonic crystal fibre is proposed and characterized based on a surface plasmon resonance sensor. The birefringence of the sensor is numerically analyzed by the finite-element method. In the numerical simulation, the resonance wavelength can be directly positioned at this birefringence abrupt change point and the depth of the abrupt change of birefringence reflects the intensity of excited surface plasmon. Consequently, the novel approach can accurately locate the resonance peak of the system without analyzing the loss spectrum. Simulated average sensitivity is as high as 1131 nm/RIU, corresponding to a resolution of 1 × 10−4 RIU in this sensor. Therefore, results obtained via the approach not only show polarization independence and less noble metal consumption, but also reveal better performance in terms of accuracy and computation efficiency.