An improved multi-recessed double-recessed p-buffer layer 4H–SiC metal semiconductor field effect transistor (IMRD 4H-SiC MESFET) with high power added efficiency is proposed and studied by co-simulation of advanced design system (ADS) and technology computer aided design (TCAD) Sentaurus software in this paper. Based on multi-recessed double-recessed p-buffer layer 4H–SiC metal semiconductor field effect transistor (MRD 4H-SiC MESFET), the recessed area of MRD MESFET on both sides of the gate is optimized, the direct current (DC), radio frequency (RF) parameters and efficiency of the device is balanced, and the IMRD MESFET with a best power-added efficiency (PAE) is finally obtained. The results show that the PAE of the IMRD MESFET is 68.33%, which is 28.66% higher than the MRD MESFET, and DC and RF performance have not dropped significantly. Compared with the MRD MESFET, the IMRD MESFET has a broader prospect in the field of microwave radio frequency.

An improved 4H-SiC metal semiconductor field effect transistor (MESFET) based on the double-recessed MESFET (DR-MESFET) for high power added efficiency (PAE) is designed and simulated in this paper and its mechanism is explored by co-simulation of ADS and ISE-TCAD software. This structure has a partially low doped channel (PLDC) under the gate, which increases the PAE of the device by decreasing the absolute value of the threshold voltage (V_t), gate-source capacitance (C_gs) and saturation current (I_d). The simulated results show that with the increase of H, the PAE of the device increases and then decreases when the value of N_PLDC is low enough. The doping concentration and thickness of the PLDC are respectively optimized to be N_PLDC = 1 × 10¹⁵ cm⁻³ and H = 0.15 μm to obtain the best PAE. The maximum PAE obtained from the PLDC-MESFET is 43.67%, while the PAE of the DR-MESFET is 23.43%; the optimized PAE is increased by 86.38%.