O desenvolvimento de pastas cimentícias para aplicação em poços de alta temperatura, como poços de injeção de vapor e geotérmicos, enfrenta desafios críticos devido às condições extremas de temperatura e pressão. Neste contexto, é necessário otimizar a reologia das pastas para garantir sua integridade e desempenho. Apesar das formulações avançadas, ainda há uma lacuna no entendimento da interação entre aditivos e substituições minerais nas blendas em pastas no estado fluido. Este estudo teve como objetivo otimizar a formulação de blendas cimentícias utilizando a Metodologia de Superfície de Resposta (MSR), analisando o efeito da substituição da sílica cristalina (SF) por adições minerais, como a cinza de casca de arroz (CCA) e o resíduo industrial da produção de argamassa (RIPA), sobre o estado fluido das pastas. Foram otimizados os parâmetros utilizando MSR, com o objetivo de maximizar a desejabilidade reológica das pastas. Os fatores analisados incluíram as proporções de SF, CCA, RIPA, além da concentração do aditivo superplastificante Glenium 51. As respostas avaliadas foram a reologia, força gel e água livre, em diferentes condições de temperatura (27°C e 52°C). A substituição de SF por CCA e RIPA apresentou resultados promissores na melhora da viscosidade plástica e redução da água livre. O modelo de Regressão de Vetores de Suporte (SVR) mostrou melhor desempenho, com um R² de 0,9771. A desejabilidade máxima foi obtida com 11% de CCA e 32% de RIPA. A MSR permitiu identificar as combinações ideais de fatores que otimizaram a reologia das blendas para aplicação em poços de alta temperatura.
Given the need to adapt drilling fluids to environmental standards, it is of great importance to seek new formulations that meet these criteria. Synthetic fluids emerged as a result of this need and are less harmful than fluids that use oils as their base. Currently, the most commonly used base in synthetic fluids is n-paraffin. Another issue that has been extensively studied in relation to environmental standards is the replacement and/or supplementation of fossil fuels with alternative sources, with biomass being a major bet in energy production. An example of biomass use in the energy sector that is already in use is biodiesel. Biodiesel can be obtained through a transesterification process, generating glycerin as a co-product. With the increasing production of biodiesel, the use of glycerin in the industry has been small compared to the amount generated, resulting in accumulations without destinations. This residue has physicochemical characteristics compatible with those desired for drilling fluids. Knowing this, four formulations of synthetic drilling fluids were studied, varying the concentration of glycerin. The results of the physical analyses carried out were satisfactory as they showed that glycerin imparts desired properties, such as viscosity, which can be adjusted according to the concentration used.