To address the problem of sudden failures during multi-parafoil formation transportation, a new fault formation reconstruction method based on the leader-following algorithm is proposed. First, monitoring of parafoil failures is established using an event-trigger mechanism within a numerical simulation framework. If a parafoil fails, the latest detachment time of a replacement parafoil is calculated based on its glide ratio to determine whether the altitude of the replacement parafoil meets the task reconstruction requirements. If it does, the formation is reconstructed using a switching control law for the replacement parafoil, enabling it to join the formation of the failed parafoil. Then, the leader-following algorithm is applied to reconstruct the formation, allowing the new multi-parafoil system to reorganize and complete the task in an orderly manner, with the replacement parafoil stably reaching the new target point as part of the reconstructed formation. Under this method, high-priority airdrop transportation tasks are ensured to be prioritized in the event of sudden failures during multi-parafoil formation operations. Lyapunov’s theory demonstrates the stability of this method. Simulation results validate the effectiveness of the framework, showing that the algorithm can successfully handle sudden failures of individual parafoils during multi-parafoil formation operations.
Rapid formation control of multi-parafoil swarms under gust disturbances and steering-line stroke limits is challenging because three-dimensional virtual commands must be realized through only two control channels and post-allocation saturation causes command mismatch. To address these problems, this paper proposes a distributed integral nonsingular fast terminal sliding-mode (INFTSM) controller based on a nonlinear six-degree-of-freedom model under the rigid-composite canopy–payload assumption, with gusts and steering-line saturation explicitly represented. Using information from neighboring parafoils, a controller maps virtual commands to symmetric and asymmetric steering inputs; the saturation residuals, gusts, and bounded modeling uncertainties form a lumped disturbance. An adaptive variable-gain power reaching law (AVPRL) adjusts the reaching gain according to the magnitude of the sliding variable, causing the gain to approach a prescribed minimum near the sliding manifold. Under bounded disturbances and sufficient residual control capability, Lyapunov and homogeneity analyses establish nominal finite-time convergence and local finite-time error bounds. Finally, 200 paired Monte Carlo trials are conducted on a software-in-the-loop (SIL) simulation platform based on MATLAB/Simulink and RflySim. The results show that the proposed method achieves a final 100 s formation-error RMSE of 58.706 ± 31.984 m, a conditional settling time of 629.29 ± 38.16 s, and an actuator saturation percentage of 1.046 ± 0.191%. These results demonstrate that, under the considered simulation conditions, the proposed method achieves multi-parafoil swarm formation control while satisfying the steering-line constraints and provides a favorable overall balance among tracking accuracy, convergence speed, and actuator-constraint handling.