Shrinathan Esaki Muthu Pandara Kone

Dr. Shrinathan Esaki Muthu Pandara Kone

Nagoya Institute of Technology, Nagoya, Aichi, Japan
+1
orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 December 2016 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
Shrinathan Esaki Muthu Pandara KoneShrinathan Esaki Muthu Pandara Kone
Shrinathan Esaki Muthu Pandara Kone
YMYukio Mizuno
Yukio Mizuno
HNHisahide Nakamura
Hisahide Nakamura
In modern industrial environment, the demand for the condition monitoring and the maintenance management for the induction motor has been increased. Among all the components of the induction motor, bearing is the critical component and the fault occurring in it has to be considered as a major issue. Usually, the bearing fault can be detected by the vibrational analysis. However, this method has a disadvantage that location of the equipment is not always easily accessible and also quite costly. Thus, in this paper, the experiment for detecting the fault in the bearing of the three phase induction motor is achieved by the frequency selection in the stator current spectrum. Their feature was evaluated by Fast Fourier Transform and the diagnosis was performed by Support Vector Machine. Experimental results were obtained, considering two types of outer raceway bearing faults at different load conditions and the promising results were obtained.

1 June 2019 in Energies
Verified
Journal Article
Open access
PDF file
Shrinathan Esaki Muthu Pandara KoneShrinathan Esaki Muthu Pandara Kone
Shrinathan Esaki Muthu Pandara Kone
YMYukio Mizuno
Yukio Mizuno
HNHisahide Nakamura
Hisahide Nakamura
Most of the mechanical systems in industries are made to run through induction motors (IM). To maintain the performance of the IM, earlier detection of minor fault and continuous monitoring (CM) are required. Among IM faults, bearing faults are considered as indispensable because of its high probability incidence nature. CM mainly depends upon signal processing and fault detection techniques. In recent decades, various methods have been involved in detecting the bearing fault using machine learning (ML) algorithms. Additionally, the role of artificial intelligence (AI), a growing technology, has also been used in fault diagnosis of IM. Taking the necessity of minor fault detection and the detailed study about the role of ML and AI to detect the bearing fault, the present study is performed. A comprehensive study is conducted by considering various diagnosis methods from ML and AI for detecting a minor bearing fault (hole and scratch). This study helps in understanding the difference between the diagnosis approach and their effectiveness in detecting an IM bearing fault. It is accomplished through FFT (fast Fourier transform) analysis of the load current and the extracted features are used to train the algorithm. The application is extended by comparing the result of ML and AI, and then explaining the specific purpose of use.

9 March 2023 in IEEE Access
Verified
Journal Article
Open access
KYKenichi Yatsugi
Kenichi Yatsugi
Shrinathan Esaki Muthu Pandara KoneShrinathan Esaki Muthu Pandara Kone
Shrinathan Esaki Muthu Pandara Kone
YMYukio Mizuno
Yukio Mizuno
HNHisahide Nakamura
Hisahide Nakamura
Induction motors are becoming crucial components in numerous industries. The daily usage of induction motors creates the demand for proper maintenance and slight fault detection to avoid serious damage to the induction motor and the shutdown of industries. Among the various kinds of faults in induction motors, bearing faults, broken rotor bar faults, and short-circuit insulation faults are the most common. Thus, detection and classification of these faults in initial stage are attracting great attention. There are conventional methods for detecting such faults, such as the vibration method for bearing faults, the self-organizing map in the case of broken rotor bar faults, and motor current signature analysis for short-circuit insulation faults. From an industrial point of view, diagnosis methods that can classify all these major faults are required. However, reports on the detection and classification of these faults in initial stage using common diagnosis methods are scarce. In this paper, all three kinds of notable faults in an induction motor were artificially induced, and diagnoses using motor stator current spectral features and the rotation speed of the motor were performed. The diagnosis was accomplished using an auto-tunable and arbitrary featured support vector machine algorithm. Although the faults were minor, a high accuracy rate was obtained. The capability to classify the faults and the high diagnosis accuracy prove the robustness and high sensitivity of the method, enabling its practical applications in industries.

3 May 2018 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
Shrinathan Esaki Muthu Pandara KoneShrinathan Esaki Muthu Pandara Kone
Shrinathan Esaki Muthu Pandara Kone
YMYukio Mizuno
Yukio Mizuno
HNHisahide Nakamura
Hisahide Nakamura
Bearing faults are a major source of failure in induction motor and early detection of fault becomes necessary because of its industrial application. A range of analytical methods has been used to detect, identify, and diagnose bearing faults, including vibrational analysis. Most analyses have used pitting as the fault, whereas in industrial environments, scratches are a more common problem. The present study investigated such scratches, applying two types of fault analysis: fault progression and fault orientation. A Support Vector Machine (SVM) algorithm was used to classify and diagnose the different types of bearing fault. The frequency domain features obtained from a fast Fourier transform (FFT) of the load current were used to train the SVM algorithm. The proposed diagnostic method was tested experimentally using induced outer race faults under different load conditions. The method was shown to be successful in diagnosing faults, suggesting potential applications in real industrial settings.

1 December 2016 in IEEE Transactions on Dielectrics and Electrical Insulation
Verified
Journal Article
Closed access
Shrinathan Esaki Muthu Pandara KoneShrinathan Esaki Muthu Pandara Kone
Shrinathan Esaki Muthu Pandara Kone
YMYukio Mizuno
Yukio Mizuno
HNHisahide Nakamura
Hisahide Nakamura
Low-voltage induction motors are widely used in the factories and are becoming very essential components for the industrial process. Improper diagnosis and condition monitoring of induction motor not only leads to high repair expenses but also cause extraordinary financial losses due to their unexpected downtime. In general, turn-to-turn short-circuit failure of stator winding due to their deterioration or damage of electrical insulation is one of the most feasible failures in motor drive systems. This paper proposes a diagnostic method based on amplitudes of characteristic frequency components of load current as features. These features are extracted by close analysis of frequency spectrum and its dependence on load current variation. This method has the advantage of low cost and short data processing time. Also to enhance the accuracy of diagnosis, a novel diagnostic method is proposed with the aid of Support Vector Machine. It is found that the proposed diagnosis method using the features and Support Vector Machine enables the detection of a slight insulation failure like one turn-to-turn short-circuit with practically accepted accuracy.

29 May 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Shrinathan Esaki Muthu Pandara KoneShrinathan Esaki Muthu Pandara Kone
Shrinathan Esaki Muthu Pandara Kone
KYKenichi Yatsugi
Kenichi Yatsugi
YMYukio Mizuno
Yukio Mizuno
HNHisahide Nakamura
Hisahide Nakamura
The demand for the condition monitoring of induction motors is increasing in various fields, such as industry, transportation, and daily life. Bearing faults are the most common faults, and many fault diagnosis methods have been proposed using artificial pitting as the fault factor in most cases. However, the validity of a fault diagnosis method for other kinds of faults does not seem to be evaluated. Considering onsite scenarios and other possibilities of faults, this paper introduces scratches on the outer raceways of bearings. A study was performed on the detection of several kinds of bearing scratches using a proposed method that was based on an auto-tuning convolutional neural network. The developed approach was also compared with other diagnostic methods for validation. The results showed that the proposed technique provides the possibility of diagnosing several kinds of scratches with acceptable accuracy rates.