Numerical analysis was used to study the deposition and burning characteristics of combining co-combustion with slagging combustion technologies in this paper. The pyrolysis and burning kinetic models of different fuels were implanted into the WBSF-PCC2 (wall burning and slag flow in pulverized co-combustion) computation code, and then the slagging and co-combustion characteristics—especially the wall burning mechanism of different solid fuels and their effects on the whole burning behavior in the cylindrical combustor at different mixing ratios under the condition of keeping the heat input same—were simulated numerically. The results showed that adding wood powder at 25% mass fraction can increase the temperature at the initial stage of combustion, which is helpful to utilize the front space of the combustor. Adding wood powder at a 25% mass fraction can increase the reaction rate at the initial combustion stage; also, the coal ignitability is improved, and the burnout efficiency is enhanced by about 5% of suspension and deposition particles, which is helpful for coal particles to burn entirely and for combustion devices to minimize their dimensions or sizes. The results also showed that adding wood powder at a proper ratio is helpful to keep the combustion stability, not only because of the enhancement for the burning characteristics, but also because the running slag layer structure can be changed more continuously, which is very important for avoiding the abnormal slag accumulation in the slagging combustor. The theoretic analysis in this paper proves that unification of co-combustion and slagging combustion technologies is feasible, though more comprehensive and rigorous research is needed.
1 August 2023 in International Journal of Hydrogen Energy
In this work, the structural function of char gasification is modelled theoretically. Considering that different components will have different pore characteristics after pyrolysis, char is divided into different micro‐structures according to its corresponding components, and then a structural equation is constructed to realize the theoretical calculation of the structural parameter. Through comparison, it is found that the proposed model has high accuracy and shows applicability for different demineralized biomass samples. An analysis of the influence of sample characteristics on the structural parameter shows that, with an increase in char particle size and initial porosity, the structural parameter shows a decreasing trend, while, with an increase in fuel ratio, the structural parameter first increases and then decreases. The model can directly predict char gasification through the characteristic parameters of the sample, including proximate analysis, ultimate analysis, initial porosity of the sample and char particle size, thus replacing previous predictions of char gasification by testing the characteristic parameters of the char pores.