Biological wastewater treatment via biofilm colonies are still in their early stages of evolution. Solid carriers made of wide range of materials in different designs have been introduced to increase biofilm growth by delivering high surface area which expands microbes’ attachment. It reduces 70-90% of total wastewater contamination (Based on the treatment circumstances and influent properties). In addition, it is considered a low-cost biological process and highly preferred by wastewater industries. Despite that, biofilm carriers failed to deliver a stable biotreatment. Unsteady bioremediation could occur because of using ineffective designed carrier which disturbs the microbial growth. Numerous biofilm carriers had been reviewed and mentioned in this paper like K1, AMT, BioBall, …etc. Then, two carrier designs named as Ultra and Micro media were introduced to carry and protect biofilm and microbial colonies from being removed during the process. Its expected that the new biofilm carriers can improve moving bed biofilm reactor (MBBR) performance in terms of stability, biomass accumulation, clogging, and biofilm growth. At the end, unharmful wastewater can be discharged to the waterways or recycled back into the industry. Finally, this study suggests designing carriers having crimped surfaces to enhance the extracellular polymeric substance attachment.
28 May 2022 in Journal of Chemical Technology & Biotechnology
Palm oil mill effluent (POME) is a massive problem to the environment, primarily waterway as it contains a considerable range of pollutants. Therefore, while enjoying the high revenue from palm oil industry, the palm oil industry responsibility towards the POME treatment must be taken into consideration. Along with the development of sustainable engineering concept, many researchers have focused on inventing a system that does not compromise the natural environment or the ability of future generations to meet their own needs. This study aimed to investigate the feasibility of using integrated biofilm treatment/membrane filtration process in producing recyclable and reusable water by manipulating the biofilm carrier type and the biofilm treatment HRT. The combined system of biofilm and membrane had delivered 98.6, 99.98, 97.5, 100, and 99.87% of COD, Turbidity, MLSS, TSS, and ammoniacal nitrogen removal, respectively. The produced permeate from aerobic POME remediation by biofilm/ membrane filtration system meets the III and IV class of the National Water Quality standards of Malaysia for water supply (Extensive treatment is required), and fishery (livestock drinking) purpose.