Shale gas is considered a crucial global energy source. Hydraulic fracturing with multiple fractures in horizontal wells has been a crucial method for stimulating shale gas. During multi-stage fracturing, the fracture propagation is non-uniform, and fractures cannot be induced in some clusters due to the influence of stress shadow. To improve the multi-fracture propagation performance, technologies such as limited-entry fracturing are employed. However, perforation erosion limits the effect of the application of these technologies. In this paper, a two-dimensional numerical model that considers perforation erosion is established based on the finite element method. Then, the multi-fracture propagation, taking into account the impact of perforation erosion, is studied under different parameters. The results suggest that perforation erosion leads to a reduction in the perforation friction and exacerbates the uneven propagation of the fractures. The effects of erosion on multi-fracture propagation are heightened with a small perforation diameter and perforation number. However, reducing the perforation number and perforation diameter remains an effective method for promoting uniform fracture propagation. As the cluster spacing is increased, the effects of erosion on multi-fracture propagation are aggravated because of the weakened stress shadow effect. Furthermore, for a given volume of fracturing fluid, although a higher injection rate is associated with a shorter injection time, the effects of erosion on the multi-fracture propagation are more severe at a high injection rate.
Damaged adobe masonry is essential to retrofit not only for continued use by less developed populations but also for historical preservation and vernacular landmark maintenance. Coating mortar on adobe can greatly improve the static load-carrying capacity of adobe masonry Wallette. Four retrofitting methods are carried out to enhance the cooperation of mortar and adobe; these four methods focus on the factors of roughness, shear dowel, and mesh size and a novel biological and traditional Chinese binder, sticky rice pulp. The mortar coating with the four bonding enhancement methods can greatly increase both the compressive and lateral load-carrying capacities, with a maximum improvement of 177 and 743%, respectively. The bonding strength has a negative effect on the compressive load-carrying capacity; on the other hand, it has a positive effect on the lateral load-carrying capacity. A range analysis is also carried out, which shows that the shear dowel depth has the greatest effect on both load situations, followed by the wire mesh size.
Moisture significantly affects the mechanical behavior of gas shale and further determines the hydraulic fracturing performance, as it is more attractive. Nevertheless, batch experiments have usually involved variable methodologies regarding the preparation of moisture-contained shale specimens in the sequence (and/or frequency) of drying and soaking treatments. Accordingly, this work investigates how the preparation methodology influences the test results of moisture-contained shale samples. This study compares three commonly used shale sample preparation strategies for acquiring different moisture contents, that is, “dry-wet”, “dry-wet-dry”, and “wet-dry-wet” strategies, followed by a Brazilian splitting test for the mechanical parameters. The results show that under the same saturation conditions, the longer the soaking time during sample preparation, the higher the degradation degree of shale tensile strength. Meanwhile, prolonged soaking can lead to a more discrete distribution of strength values, and the failure mode may deviate from the Brazilian splitting theory model. Under the combined influence of moisture content and soaking time, the tensile strength of shale decreases approximately linearly with increasing saturation, while the degradation degree increases nonlinearly with increasing saturation, and the degradation rate changes from slow to fast. According to the observation of the microstructure of hydrated shale, prolonged soaking can lead to an increase in the expansion of clay minerals in shale by hydration, resulting in looser and more fragmented internal structure, and further degradation in shale strength. In order to weaken the interference of hydration when studying the effect of moisture content on the tensile strength of shale, the soaking time should be minimized as much as possible during the preparation process.