Face masks are recommended to reduce community transmission of SARS-CoV-2. One of the primary benefits of face masks and other coverings is as source control devices to reduce the expulsion of respiratory aerosols during coughing, breathing, and speaking. Face shields and neck gaiters have been proposed as an alternative to face masks, but information about face shields and neck gaiters as source control devices is limited. We used a cough aerosol simulator with a pliable skin headform to propel small aerosol particles (0 to 7 µm) into different face coverings. An N95 respirator blocked 99% (standard deviation (SD) 0.3%) of the cough aerosol, a medical grade procedure mask blocked 59% (SD 6.9%), a 3-ply cotton cloth face mask blocked 51% (SD 7.7%), and a polyester neck gaiter blocked 47% (SD 7.5%) as a single layer and 60% (SD 7.2%) when folded into a double layer. In contrast, the face shield blocked 2% (SD 15.3%) of the cough aerosol. Our results suggest that face masks and neck gaiters are preferable to face shields as source control devices for cough aerosols.
Universal mask wearing is recommended to help control the spread of COVID-19. Masks reduce the expulsion of aerosols of respiratory fluids into the environment (called source control) and offer some protection to the wearer. Masks are often characterized using filtration efficiency, airflow resistance, and manikin or human fit factors, which are standard metrics used for personal protective devices. However, none of these metrics are direct measurements of how effectively a mask blocks coughed and exhaled aerosols. We studied the source control performance of 15 cloth masks (face masks, neck gaiters, and bandanas), two medical masks, and two N95 filtering facepiece respirators by measuring their ability to block aerosols ≤7 µm expelled during simulated coughing and exhalation (called source control collection efficiency). These measurements were compared with filtration efficiencies, airflow resistances, and fit factors measured on manikin headforms and humans. Collection efficiencies for the cloth masks ranged from 17% to 71% for coughing and 35% to 66% for exhalation. Filtration efficiencies for the cloth masks ranged from 1.4% to 98%, while the fit factors were 1.3 to 7.4 on headforms and 1.0 to 4.0 on human subjects. The Spearman’s rank correlation coefficients between the source control collection efficiencies and the standard metrics ranged from 0.03 to 0.68 and were significant in all but two cases. However, none of the standard metrics were strongly correlated with source control performance. A better understanding of the relationships between source control collection efficiency, filtration efficiency, airflow resistance, and fit factor is needed.
1 July 2006 in Journal of Occupational and Environmental Hygiene
Prolonged, extensive exposure to asphalt fume has been associated with several adverse health effects. Inhaled polycyclic aromatic hydrocarbons (PAHs) from asphalt fume exposure are of concern. The objective of this study was to characterize both qualitative and quantitative differences between fumes generated at 150°C and 180°C using a well-controlled laboratory road paving fume generation system. Fumes were characterized by total volatile and particulate concentration, simulated boiling point profile, and specific PAH content. The mean concentrations of the volatile fractions generated at 180°C and 150°C were 23.3 mg/m3 and 11.2 mg/m3, respectively, demonstrating a statistically significant shift in concentration. The mean concentrations of the particulate fractions generated at 180°C and 150°C were 42.4 mg/m3 and 28.0 mg/m3, respectively. The simulated boiling point profile did not show a significant qualitative difference between the fumes generated at the two temperatures. Naphthalene, acenaphthene, fluorene, phenanthrene, fluoranthene, pyrene, and chrysene were identified and quantified from the fumes.
Occupational exposure to 4,4′-methylene diphenyl diisocyanate (MDI), the most widely used monomeric diisocyanate, is one of the leading causes of occupational asthma (OA). Previously, we identified...
1 November 2003 in International Journal of Mass Spectrometry
4,4′-Methylene diphenyl diisocyanate (MDI), a highly reactive chemical that is essential for manufacturing polyurethane products, is the most widely used diisocyanate (dNCO) globally (Allport et al...