Delf Sachau

Delf Sachau

orcid

Research Focus & Metrics

Academic Career Length

29Years (1998-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2000 in Journal of Intelligent Material Systems and Structures
Verified
Journal Article
Closed access
LCL. F. Campanile
L. F. Campanile
DSDelf Sachau
Delf Sachau
The belt-rib concept for lifting surfaces with variable camber evolved at DLR recently as one of the most promising solutions for the adaptive wing. With the belt-rib idea the adaptive wing issue is approached in a new way: instead of a “mechatronic” solution with hinges or linear bearings a “structronic” solution is chosen, where distributed flexibility allows the desired shape changes. The resulting system is not only easier to maintain due to the absence of wear, but also is structurally more reliable and substantially lighter. The new concept evolves from the classical wing structure. The classical rib, which is in charge of the wing section’s stiffness, is replaced by a “belt rib,” which allows camber changes within given limits while leaving the remaining in-plane stiffness properties of the section widely unchanged. The evolution of the belt-rib concept was accompanied by experimental tests on different prototypes. After a first development stage, in which mainly the system’s shape adaptability and the overall stiffness properties were investigated, further steps followed, focused on manufacturing, weight optimization and strength aspects. Recent developments dealt with the construction of a model with solid-state hinges, realized as hybrid glass fiber-carbon-fiber reinforced composite structure. The model is actuated mechanically by cables, which can be replaced by multifunctional actuators—like shape memory wires—in the future. The paper opens with an introduction about shape control of aerospace structures and variable camber in particular, in which the major advantages of a “structronic” approach with respect to classical solutions are discussed. Then the fundamentals of the belt-rib concept are sketched, with some significant results of the feasibility proof phase, followed by the description of the last developments. The conclusion summarizes the potential of a structronic approach to shape control with an outline of possible future work.

1 June 1998 in Vehicle System Dynamics
Verified
Journal Article
Closed access
SDStefan Dietz
Stefan Dietz
HNHelmuth Netter
Helmuth Netter
DSDelf Sachau
Delf Sachau
SUMMARY For dynamically loaded lightweight structures fatigue strength is an important design criteria. In this paper a new method to predict fatigue lifetime is shown. This is based on the combination of frequency domain and time domain calculations, which allows lifetime prediction with reduced computational effort. The method is implemented to work in a concurrent engineering software environment together with a computer aided design (CAD), a finite-element-method (FEM) and a multibody system (MBS) program. The benefits of the new approach are demonstrated by application to the bogie of a freight locomotive. The dynamic loads acting on the bogie are computed by multibody simulation. The bogie frame is considered as an elastic body of the MBS and the highly nonlinear wheel rail contact is modeled quasi-elastically. For the ride on a straight track the equations of motion can be linearized and the covariance matrix of the loads is calculated. The ride through a ramp is simulated by using the nonlinear differential equations. FEM yields the stresses in the most stressed locations of the bogie depending on the loads calculated by multibody simulation. Based on these stresses the fatigue life prediction is carried out in the MBS post-processing program FATIGUE.

1 May 2018 in The Journal of the Acoustical Society of America
Verified
Journal Article
Closed access
PDF file
JBJan Buck
Jan Buck
SJSergej Jukkert
Sergej Jukkert
DSDelf Sachau
Delf Sachau
An application of active noise control (ANC) is the active headrest, using actuators (loadspeakers), sensors (microphones), and a controller to create a local zone of quiet around the occupants head. In this paper, the attenuation performance of various ANC-algorithms for active headrests known from literature is evaluated considering non-stationary broadband disturbances and head movement. Numerical studies are performed to determine the optimal plant models and parameters for the ANC-algorithms. Based on the findings of the numerical studies, several real-time experiments are conducted with and without head tracking examining the distribution of the 10 dB zone of quiet and the attenuation at the occupants ear using either a head mounted microphone technique, the remote microphone technique, the virtual microphone technique, or the virtual microphone control method. It is found that none of the algorithms using a virtual sensing technique can produce a 10 dB zone of quiet for all considered non-stationary broadband disturbances and head movement. For the algorithm using a head mounted microphone, it is possible to form a 10 dB zone of quiet, but placing a microphone at the ear is not feasible in most situations.

1 January 1998 in Mechanics of Structures and Machines
Verified
Journal Article
Closed access
LGL. Gaul
L. Gaul
JLJ. Lenz
J. Lenz
DSDelf Sachau
Delf Sachau
Lightweight flexible structures; e.g., for large deployable space systems, often consist of truss structures. Microslip and macroslip in the joint contact surfaces are the dominating dissipation mechanisms, when compared to material damping and environmental damping, if no additional damping measures are applied. So far only control of operational modes by actuators in the truss element is realized. This paper aims to control the nonlinear transfer behavior of joints by adapting the contact pressure. This is achieved by piezoelectric elements in bolted connections. Active joint description by ordinary differential equations (ODE) with internal variables, based on experimental data, is implemented in the hybrid multibody system (MBS) of the assembled truss structure. The structural response is decomposed into large rigid body motion and superimposed small elastic deformations. The equations of motion are linearized by a perturbation technique based on the splitting of low frequency and high frequency modal contents. The flexibility of the MBS is treated by superposition of structural modes calculated by the finite element method (FEM), in the sense of a Ritz approximation. Simulation of free, as well as forced, vibrations of the structure with active joints in a closed control loop underline the gain of damping performance compared to the associated passive system.

13 August 2020 in Mechanical Systems and Signal Processing
Verified
Journal Article
Closed access
JBJan Buck
Jan Buck
DSDelf Sachau
Delf Sachau

1 August 2016 in Journal of Sound and Vibration
Verified
Journal Article
Closed access
DSDelf Sachau
Delf Sachau
SJS. Jukkert
S. Jukkert
NHN. Hövelmann
N. Hövelmann