Two-phase flow instabilities have been identified as one of the impediments for achieving high heat flux in boiling systems due to their potential heat transfer deterioration. However, most of the fundamental characteristics of two-phase flow instabilities and the mechanisms leading to the heat transfer deterioration remain uncharted. In particular, up to what extent self-induced oscillations can deteriorate the heat transfer coefficient is not well understood. Here, we measure the flow boiling heat transfer coefficient under controlled oscillatory flow conditions. We show that flow oscillations can deteriorate the heat transfer coefficient significantly, but the deterioration depends on the amplitude and period of the oscillations. In particular, the deterioration is primarily a consequence of the dry-out at the wall that in turn increases the averaged wall temperature.
Although two-phase flow instabilities are attributed to be one of the impediments for achieving high heat flux in boiling systems, most of their fundamental characteristics remain uncharted. In particular, pressure drop oscillations and density wave oscillations are two types of dynamic two-phase flow instabilities that can cause large variations in pressure and temperature. Under particular working conditions, both oscillations have been observed to interact, resulting in long-period pressure drop oscillations with superimposed short-period density wave oscillations. However, in this situation, the amplitude of the density wave oscillations is typically larger than the corresponding to a pure density wave oscillation. Here, we show that a compressible volume in the system, essential for the occurrence of pressure drop oscillations, plays a major role in amplifying the amplitude of the superimposed density wave oscillations.