This paper presents an efficient location tracking algorithm that integrates vision-based motion estimation and IMU data. Orientation and translation parameters of the mobile device are estimated from video frames or highly overlapped image sequences acquired with built-in cameras of mobile devices. IMU data are used to maintain continuity of the orientation estimation between sampling of the image homography calculation. The developed algorithm consists of six primary steps: (1) pre-processing; (2) feature points detection and matching; (3) homography calculation; (4) control points detection and registration; (5) motion estimation and filtering; (6) IMU data integration. The pre-processing of the input video frames or images is to control the sampling rate and image resolution in order to increase the computing efficiency. The overlap rate between selected frames is designed to remain above 60 % for matching. After preprocessing, feature points will be extracted and matched between adjacent frames as the conjugate points. A perspective homography is constructed and used to map one image to another if the co-planar feature points between subsequent images are fully matched. The homography matrix can provide the camera orientation and translation parameters according to the conjugate pairs. An area-based image-matching method is employed to recognize landmarks as reference nodes (RNs). In addition, a filtering mechanism is proposed to ensure the rotation angle was correctly recorded and to increase the tracking accuracy. Comparisons of the trajectory results with different combinations among vision-based motion estimation, filtering mechanism and IMU data integration are evaluated thoroughly and the accuracy is validated with on-site measurement data. Experimental results indicate that the develop algorithm can effectively estimate the trajectory of moving mobile devices and can be used as a cost-effective alternative for LBS device both in outdoor and indoor environment.
Unstructured peer-to-peer (p2p) networks usually employ flooding search algorithms to locate resources. However, these algorithms often require a large storage overhead or generate massive network traffic. To address this issue, previous researchers explored the possibility of building efficient p2p networks by clustering peers into communities based on their social relationships, creating social-like p2p networks. This study proposes a social relationship p2p network that uses a measure based on Hebbian theory to create a social relation weight. The contribution of the study is twofold. First, using the social relation weight, the query peer stores and searches for the appropriate response peers in social-like p2p networks. Second, this study designs a novel knowledge index mechanism that dynamically adapts social relationship p2p networks. The results show that the proposed social relationship p2p network improves search performance significantly, compared with existing approaches.
The world-to-chip interface is an essential yet intriguing part of making and employing microfluidic devices. A user-friendly connector could be expensive or difficult to make. We fabricated two ports of microfluidic chips with easily available materials including Teflon blocks, double adhesive films, coverslips, and transparency films. By using a mini grinder, coverslips were drilled to form small holes for the fluid passages between port and chip. Except for the double adhesive films, the resultant ports are durable and re-useable. The DK1 port, contains a mini three-way switch which allows users to handle fluid by a tube-connected pump, or by a manual pipette for the sample of trace amount. The other port, the DK2 port, provides secured tube-connections. Importantly, we invented a bridge made of craft cutter-treated transparency films and double adhesive films to mediate liquid flow between DK2 port and chip. With the use of a bridge, users do not need to design new ports for new chips. Also, individual chips could be linked by a bridge to form a chip array. We successfully applied DK1 port on a microfluidic chip where green fluorescent protein was immobilized. We used DK2 port on an array of fish chips where the embryos of zebra fish developed.