Rock mass contains various discontinuities, such as faults, joints, and bedding planes. Among them, a joint is one of the most frequently encountered discontinuities in rock engineering applications. Generally, a joint exerts great influence on the mechanical and hydraulic behavior of rock mass, since it acts as a weak plane and as a fluid path in the rock mass. Therefore, an accurate understanding on joint characteristics is important in many projects. In-situ tests on joints are sometimes consumptive in terms of time and expenses so that the features are investigated by laboratory tests, providing fundamental properties for rock mass analyses. Although the behavior of a joint is affected by both mechanical and geometric conditions, the latter are often limited, since quantitative control on the conditions is quite complicated. In this study, artificial rock joints with various geometric conditions, i.e., joint roughness, were prepared in a quantitative manner and the hydromechanical characteristics were investigated by several laboratory experiments. Based on the results, a prediction model for hydraulic aperture was proposed in the form of , which was a function of the mechanical aperture, joint roughness, and contact area. Relatively good agreement between the experimental results and predicted value indicated that the model is capable of estimating the hydraulic aperture properly.
A rock joint is a planar discontinuity that has significant influence on the mechanical and hydraulic characteristics of rock mass. Laboratory experiments are often conducted on a joint to investigate and provide fundamental information for rock mass analysis. Although joint roughness and mechanical aperture exert great effects on the experimental results, controlling them in quantitative manner is quite complicated and consumptive in terms of specimen preparation. A new and simple method for the quantitative generation of the joint specimen was proposed in this study. Based on random midpoint displacement method, a joint specimen with a void space inside was generated. Parametric studies for the roughness and mechanical aperture were carried out, and as a result, the two joint properties could be controlled by manipulating input parameters of random midpoint displacement method. In order to validate the proposed method, two joint specimens, which had different levels of roughness and aperture, were generated and printed. Surface coordinates of the specimens were obtained by a 3D laser scanner, and calculated to make a comparison between the target values and the estimated values. Results showed that the method was capable of generating joint specimens with satisfactory precision.